Unlock region code information

You cannot change the region on the player. If you want to play a region 1 disc, you'll have to use a computer and hook it up to your TV (you can change the region on optical drives a limited amount of times on computers), or acquire a region 1 player.

If you're savvy enough, you could rip (using a computer) the disk into a compressed format the LG system can read (MKV, MP4, etc.) and play it off a USB stick.

If you suffer from region code troubles, you can download a region free DVD player software tool on your pc and then you can play discs of any regions you want. You can try Leawo Blu-ray Player which is a free Blu-ray player and a region free player.

DVP 3618 - how to unlock region codes?

1. Power ON the DVD player with no disc inside
2. Go to the SETUP icon and press OK; next, go to
Preferences and press OK
3. With preferences highlighted,
3a. Press NEXT CHAPTER (button above AUDIO, it looks like
this: >'),
3b. Press PREVIOUS CHAPTER (button above SUBTITLE, it looks
like this: '<)
3c. NEXT CHAPTER >'
3d. PREVIOUS CHAPTER '<
4. The OSD will show the current Region Code
5. Press the Navigation Up or Navigation Down buttons to
select your desired region, or 0 for region free
6. Press OK to confirm your region selection

It works for DVP 3618 model.

To make your Philips BDP3100 region free (this works on a BDP3100/05 purchesed in the UK in June2010)

1. Make sure there is no disc in the tray when you switch on.
2. Press "home" key on remote control.
3. Enter number "1389310".
4. Switch off. Wait a few seconds and then switch on...now region free.

Please note, the above hack has only been confirmed as providing region-free DVD, not Blu-Ray.

jvc g30 reads locked now whenever i try to open it to play a dvd

DVDs are region coded. This means that they will only play on a DVD player from the region the DVD was produced to be watched in. For example, an Australian DVD is Region 4. It will only play on a Region 4 player. If you try to play it on a player that is set for a different region, it will probably not play. One way around this is to get hold of a multi region player. These are widely available. Alternatively, you should be able to watch the DVD on your computer, although you may need some region free software if your computer's dvd player has been locked. Usually computer DVD players will allow you to play DVDs from any region a few times and then they will lock to a particular Region Code. If you are in North America, you will need a PAL player. The only other thing you may be able to do is to unlock your existing player to convert it to region free. Many DVD players can be unlocked but you would need to find the unlock information for your paticular player. Hope this helps....

Hi,

To my knowledge, due to firmware design, most JVC region locked DVD players can not be unlocked with entry codes through the remote. While some JVC models could be unlock with a firmware update or a PC interface neither of which is available for a TH-P3.

Im sorry but thats just it for this model.

Alternately, a long method is to convert/copy the DVD disc itself from any region to whatever region your JVC is locked into. There are freewares just for this purpose. An example is DVD SHRINK 3.2.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

to play discs from different regions on HTS3548:

Before you begin, ensure you have connected your DVD player to your TV and both have the power on. Once you have connected the TV, follow the instructions below.

-- Open the disc tray
-- On the remote control, press in sequence:
Disc Menu
Stop
7 3 4 4 6 6 0
OK
-- Make sure Region 0 is showing on the TV.

This should hopefully help!!!!

Multizone code for Teac PL-D3200
Here is the procedure to unlock your Teac PL-D3200 to play all zones of DVD's.
Using your remote control:
1. Switch power on 2. Open the dvd tray (leave it open with no dvd in it) 3. Press "stop" 4. Press "734466" 5. Use cursor to scroll up or down until it says "Region 0" 6. Press "OK/Enter" 7. Switch power off 8. Switch power on
It will now play all region DVD's! :-)