At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I bought a new HP Pavilion a4313w-b Desktop PC. Plugged all connections in and green light is on and put the CD in and it won't install. Can you give me step by step instructions?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Please try the following: 1.remove the power cable an plug it again 2.check is the power it's on at the back of the source. 3.if you hear some noises write them down and search for the error codes on the net.
There could be many reasons for this. Open the case and make sure the components are plugged in tightly. Make sure the CPU Fan is spinning and is dust free.Reseat the RAM modules, make sure to clean the RAM slots before reseating the modules. If all this fails to give results, but a new power supply and try that, you do not have to install the power supply but can keep it outside and test it. If the MB is gone, then, look to see if she still has warranty, if not ebay may be a cheap answer for the same MB.
Try connecting the fan to another fan plug in on the mother board usually there are two or three of them . Then go into the BIOS [press delete while booting] and make sure it is turned on
Check all wires for loose connections--- if the memory was wrong or something, it would still attempt to boot but stop during the POST and start to beep
the power supply seems to be fine> but we can check by removing the BIG ATX white connector on the motherboard> if the light is still on then the power supply is fine>>> then
we can first remove all the RAM from the motherboard> then connect the computer to power and then see if the Computer beeps or not> if it does the motherboard is fine > if it doesnt then the motherboard need to be replaced
Go to the HP website to product support/downloads,put in the model number for the drivers.Install the drivers before you connect the printer.Usually you will be told when to connect it.
To do what precisely??? If its new its all go!!!!
×