I can not access the linksys access point, the 192.168.1.245 does not link.

Anon,
This link has a tutorial that is well written and easy to follow.
Setting up the WAP610N

Take care and have a great night! -Alex K.

To secure your wireless network from unauthorized access, you need to setup wireless encryption and limit wireless access. Please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

I just buy another D-Link DWL-2100AP

Hello,

find below the link to the manual:

http://www.linksysbycisco.com/US/en/support/WAP54G/download

Hope it helped.

First connect your router with ethernet cable with 1 computer .
Then access this link

http://192.168.1.1 or
http://192.168.0.1

type user name as "admin" and password as "admin" or blank or "password"

then go t o wi fi security then go to encryptripn key it is your password.to connect netwrok

Hi there If u have a linksys wrt54g router. the omni antena will not give u the maximum wireless signal if u are going to set it on a motel, u need to setup a wireless access point in order to broadcast the signal or to repeat the signal u need a wireless access point and the model # is WAP54G..
here is the link just incase u want to know more about on how to set up a wireless access point
1. How do I configure an access point as a wireless bridge?
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4194
2. How do I configure an access point as a wireless repeater?
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4200
3. How do I configure an access point as an access point client?
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4202
4. How will I know if an Access Point is configured as an Access Point?
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4165..

check this out and i hope this will solve ur concern..

Here is a link to the linksys website. I have already found most of what you need for this product WPC54g. Look on the label of the product and you should see the version which the below page is refering to.
http://www.linksysbycisco.com/US/en/support/WPC54G/download

Hope this help

Go to the following link and you can get any of the drivers and software you need.


http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1166859837314&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=3731486492B48&displaypage=download

All you have to do to reset the password on the router is to reset the router. You just have to find the reset button and hold it for about 15 seconds. If you have any problems with reseting just look at this pdf.

ftp://ftp.linksys.com/pdf/wrt54g_ug.pdf

To configure your linksys, access point, we need more information, the ipaddress oif your dlink router and the wireless settings on your dlink router..,

for more informations, check this link http:kb.linksys.com

for more details contact linksys; 18005465797