I own 2 Bose wave radios. One is 5 yrs old and

I took mine back to the Bose store and they gave me credit on my Wave that was about ten years old toward a new CD wave radio. I would recommend taking it to the Bose store and see what they can do for you.

go to Bose.com and put support and identify your wave radio and then you look at the parts that you buy for it.

I connected mine to our tv through the audio jacks and not only did the sound not come through the bose speakers, I think I fried the curcuits---The radio no longer works--nothing happens when I plug it in. So don't do it . This bose radio is over 12 yrs old---the tv is new---that could be it

i would contact bose, they should repair it or replace it due to the fact of the price that they charge and i beleive they give you a lifetime garuntee, www.bose.com

Buy a quality CD radio. Bose is not quality. It is overpriced overhyped so-so quality stuff. Repairs by Bose will cost more than a better quality replacement.

If you can check ohms,you can also read volts. Open the radio again and look for DC volts on the rectifiers capacitors.They look like :cans", normally the color is blue. Check for positive dc v. against chassis ground. If no + tension,your rectifier or your secondary are open.

please my name is dele i have this BOSE radio/cd system model number is AWRC2G which transformer burnt out rightly, that the input is 240volts which output is the problem and in nigria. please i just want to know the output on each coloured wire of the secondary that has 8 wires output from the secondary (2 purple - brn = volt, 2 blue = volts, and 2 black - gray = volts. so that similar that i can use to work it.
thank you

Reception issue, happens with alot of old radios. Try a different aerial.

I have one that is doing the same thing. Will your radio make a POP sound when you unplug it? I was told by Bose Tech it is 15 yrs old and they will not work on it. He told me that if it makes a POP sound that it is not the fuse or power supply???

Actually the problem was caused by a bad 470uf cap, that was used to filter the powersupply for all the analog amps. Replaced the cap the unit works like new.