Lost remote and can't change the input - RCA 14F512T 14" TV

Unfortunately, the Input button (to change the source from INPUT 1, INPUT 2,
INPUT 3, INPUT 4, Front Input, HDMI/DVI, and last-active channel) is only on the remote. If your universal remote was built 6 months after the TV was released, try a different code for RCA/Thomson TVs (assuming the remote has an input or source key). Thomson built the TV.

If your universal remote doesn't have an input key, you probably need a higher end remote (one with that key or one that can be programmed from a computer). Alternatively, you can get an exact replacement remote here: http://www.remotes.com/remotes/servlet/rs?a=Search&o=c&uid=0&m=HD52W58&uuid=12927154203570 .

I hope this helps.

Cindy Wells

If I'm Correct There Is Only One Set Of Inputs On That Model TV. What Inputs R U Reffering To?

I would suggest you try to find a universal remote that has an "input" or "source" button and program that one to your tv. By pressing the "source" or "input" button, it will change the input to the tv. I hope this helps! -Der Strom

Try channel button to 1-2-3--99-98-1-2-3 up & down it should come between 0 & 1

You have to have the remote to change inputs on this set. Probably a universal remote will work good.

Another expert site answered my question. Since there was no INPUT button on the TV, I need to buy an original remote.

If you have lost the remote, go to any electronics store and buy a universal one. I have programmed many generic remote controls, and they all work fine for adjusting the video inputs. Not all television sets allow their video inputs to be switched without the remote. Most likely you will have to buy a replacement.

How to get the input on the tv without the remote

You may have to order an original go to www.sears.com ...the paret dept and have your make and model ready!
This should fix ya

lost remote, can not switch imput