In Use/Memory FAX after changing ink cartridge

Hy, your printhead has dry ink inside. Try to put the print head in ditiled water ( NOT tap water) and live it over night. If that dosent help try in warm distiled water and live it over night. Be careful not to put the print head in the printer when is wet...let it dry for 2-3 hours. If still dosent work you need to replace the printhead.

Hello.
This can happen with certain types of compatible cartridges. the large black is usually the issue. Try unplugging the printer from the power for 5 mins. Also Try replacing the large black with a different brand, compatible cartridges are great for saving money but can cause some issues with the electronics. I recommend G & G Brand compatibles. they have been rated very well in PC Magazines and give no issues with recognition.
Regards GM

The small black tank is called "Photo Black Ink Cartridge" and is usually only sed when printing color pages or photos. There is no way to bypass that. Use the ********* ink since it is a cheaper cartridge judging by volume. Sets can be purchased on ebay for very low price. Link below:
7 BLACK Printer Ink with chip fits Canon PGI 5 MP600 MP800 MP830 MX850 eBay

If you need further help, I’m available over the phone at https://www.6ya.com/expert/alex_22751bbefa74c3d0

check in your printer properties under color management. the printer might have an option for you to switch it to just black and white.

With your hand beneath the control panel, lift straight up. The top half of the unit will open. If the power is ON, the cartridge unit will move from its parked area on the right side to the center, where you can see all the ink tanks. Tanks that are low or out of ink will be indicated by the light on the tank flashing. If the light is steady, the tank still has sufficient ink. Remove the tank by pushing the tab on the front of the tank and lifiting up.

http://reviews.cnet.com/multifunction-devices/pixma-mp830-office-all/4505-3181_7-31785803.html

Replacing the five ink tanks (cyan, yellow, magenta, black dye, and black pigment) is a simple task. The top of the printer flips up to reveal the ink tanks and the printheads, and by flipping a lever, you can pull out each tank individually. Being able to replace individual tanks is a boon, as you won't waste colors you use less frequently. Also, you won't need separate photo ink to print photos, which we appreciate. Canon ships the Pixma MP830 with full ink tanks. Replacement color and dye-based black ink tanks cost $14.25 apiece, while the pigment-based black ink tank costs $16.25. Canon estimates the cost per page for both black text and color text to be an inexpensive 2 cents.

it won't print faxes if ink is too low so it stores them until you replace the low cartridge or cartridges. Don't know if you can transfer to computer. Do it the other way around and go to www.myfax.com I did and I love it.

the waste ink pads are full ..when the black line appears it is an indicator that the waste ink pads are full it is usualy because the printer has reached its life expectancy the solution is either buy a new printer or pay a tech about 170 dollars to repair it

This machine is not meant to switch between the two black cartridges. The large one is used when you are using black only, and the small one is used when you are printing in color.

1. Just open and close the cover a bid, this will initiate new checking of all ink cartridges
2. clean the contacts of the inkcartridge chip e.g. with spirit
3. Press the reset/stop-button for >10s to quit the error ... but be aware that the ink level will no longer shon correctly