Hi im wondering if anyone knows what the prblem is on the above model number it comes up with a fault saying E1 fault ? any ideas please.
EI is the unit is not draining. On older models, prior to mar 07, a common problem is wires sticking in the insulation on the door and breaking. Remove panel and see if there are any stuck. Check continuity of the wires, can also be a internal break so check carefully.
Sgt 48
Oh great! we have the same problem.
i hope its not the motor!
:(
E1 is usually a very common fault of the wash motor not working.
The impeller breaks away from the motor shaft and doesn't spin, therefore, it doesn't pump water.
There is a sensor that activates with low pump pressure, which shuts down the machine and displays the error, E1.
The only other causes (that I'm aware of) are leaking water supply hoses, or pump blockage, but the motor fault is by far the most common.
Hope this helps.
436 views
Usually answered in minutes!
I get the code 1E
×