Im using a Star TSP600 printer, it respond to the computer but the paper prints a lot of quetion marks insted of the normal text, what mite be the problem

i know you stated you put the paper in correctlyin the printer but if the thermal reactive side of the paper is not facing the print head the thermal paper won't print on the wrong side of the paper. it will load into the printer and seem ok but the heat on the wrong side of the paper will not react and show any writing. Can you try turning the paper over in the printer feed holder so the other side of the paper faces the print head and give it another test .

There are DIP switch settings in the printer, Check the old one and change the new on to match.

Are you sure the paper is correctly routed? It will pass a detector. Mis-aligned paper, or defective/damaged detector will present the error.

Hi

Please load the paper correctly with the side that can be scored by your finger nail pointing downwards.

Contact [email protected] for further help.

Star Support

try normal a4 paper.

1. Define your Star Micronics Printers device model TSP600
2. Define your operating system to install your Star Micronics Printers device
3. Search Printers driver category
4. Find Star Micronics Printers driver
5. Select Star Micronics TSP600 Printer Network Setup Utility Ver. 2.0.1 Windows XP, 2000, ME, 98, 95
6. Download Star Micronics TSP600 Printer Network Setup Utility Ver. 2.0.1 Windows XP, 2000, ME, 98, 95
7. Install Star Micronics TSP600 Printer Network Setup Utility Ver. 2.0.1 Windows XP, 2000, ME, 98, 95
8. Restart or reboot your computer to finish your driver installation.

Download here:

http://www.opendrivers.com/driver/247183/star-micronics-tsp600-printer-network-setup-utility-ver.-2.0.1-windows-xp-2000-me-98-95-free-download.html

You will need to take the printer in for a service. The cutter is Jammed and that causes the fault on the paper feed.

If it is now printing blank and was working before the paper roll change then you need to flip the roll over and print on the other side of the paper. This is assuming you have the correct thermal paper roll.

Here is the driver download page, :
Technical and Sales Support - Printers Drivers & Utilities

Contact them here if you want to order the CD.

http://www.star-emea.com/techsupport/drivers.html

heres the link for the drivers your looking for there in zip format hope this helped you a bit