My digital channels on my tv arent working

Hi Ben
It could be a T-Con failure. There's a loss of part of the signal between the board and the display. A few components could be the culprit. Do the usual turn it off unplug for a while Ect, and see if you can update the firmware and software. Try [email protected]

0050 0074 0076 0080 0082 0101 0102. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/
Try this link too
http://remotesearch.blogspot.com/

To know more about this, you have to download the repair manual to this set. Its disassemble section, will give you all details.
Gopakumar Gopalan Google

I have a Sanyo 32inch TV and my technika universal remote tk51r 1in1 isn't programming what do I do

2098,2099,2091,2067. Try these codes. If you wish to get more details, check the sites linked here. Set-up code list, and Set-up procedure to many popular brand remote controls are given.
http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic / Timeslide, can be selected by the drop-down list, by the top left of the display window, will make surf easy.

The range and the airial antena have trouble recieving the new location air signal.Try buy a new digital antena and install it.Auto tuning it again.Should work fine.

I need a code for my Evotel tv model number elcd40usbfhd

I have a Bush 6690D and I can confirm that it does have a built-in digital decoder for terrestrial signals (Freeview).

Have you checked whether ***********'s TV is set to digital mode ? The "Mode" button on the remote cycles between analog, digital and AV inputs.

i had same probs tv 4 monts old new tuner fitted
and yet one more new tuner fitted when 8 months old
it now turns pick off at randod but sound stays on have to unplug mains for temp fix
now warranty has run out philips are not interested

are all channels not working? your town might have changed to a digital signal therefore you will not be able to receive broadcasts if this is the case you would need a different scanner