Question about HP Color LaserJet 2600n Printer
We are facing a problem in configuring HPCLJ 2600n on a Windows Clustered Print Server. We found that this printer is NOT compatible with 2550 as HP claimed since it's not using PCL or PostScript dirvers. Instead it's using a Host-Based printing language !!!
Please advise me how can we resolve or workaround on this issues without changing the printer.
Is the driver the same as a 2550? Maybe you should download a 2600N driver from HP.
Posted on Mar 19, 2008
Tips for a great answer:
Jan 17, 2014 | HP Jetdirect 170x Print Server
Dec 27, 2012 | Samsung Office Equipment & Supplies
Dec 07, 2010 | HP Color LaserJet 2600n Printer
Contrary to the on-line advice that I have found, the Linksys wireless print server WPS54G is compatible with Windows 7. It is the installation program that is not compatible. While not as bad as the early days of setting hardware dip switches, the print server must be installed manually. Following are the many steps that I took to install my WPS54G to work with Windows 7; lengthy, but worth it.
1. Connect your printer to the PC using a USB cable and USB port. Allow the printer to install. Print a test page. Even though you just installed the printer, check for an updated printer driver at the manufacturer's website. I did this late in the process before I could get the printer to work. It installed an HP universal driver.
2. Set the printer as the default.
3. If you do not know the IP address of your print server, access the router using your browser. See your manual for instructions. For a Linksys, type the default IP router address 192.168.1.1 into the browser address bar. If you have done this in the past, set up your router security. The default user name is left blank and the default password is admin.
4. Connect your print server to the PC using a USB cable and USB port.
5. On the router locate the DHCP Client Table and determine the IP address of the print server. You might have to refresh the table. The default is probably 192.168.1.78.
6. Access the print server using your browser and the IP address of the print server. The default user name is left blank and the default password is admin. Set up security to match the router, SSID, password, type of encryption, etc.
7. Go to "Devices and Printers" (from the start menu), on the default printer icon that you just installed, right click and open "Printer Properties." Click on the "Ports" tab.
8. Click on "Add Port." Select "Standard TCP/IP Port" and click on "New Port." Click "Next." Add the IP address of the print server (probably 192, 168.1.78) and call the port whatever you want. Click "Next."
9. After the port configures and you get the "Port Settings" tab (you can also get there by clicking on "Configure Port), change the protocol to "LPR" and click "LPS byte counting enabled." Use "p1" or P2" etc. for the "queue name."
10. Disconnect the print server from the USB port and let it sit for 30 seconds.
11. Disconnect the printer from the USB port.
Apr 06, 2010 | Linksys Wireless-G WPS54G Print Server
Jan 25, 2010 | HP Color LaserJet 2600n Printer
Nov 27, 2009 | HP Color LaserJet 2600n Printer
Jul 17, 2009 | HP Color LaserJet 2600n Printer
May 29, 2008 | AMT Datasouth Datasouth Documax 3300...
163 people viewed this question
Usually answered in minutes!