I get no response from my Tascam US-144 and windows 7.

Hello you can download a manual and other stuff here:

http://tascam.com/product/us-144/downloads/

You need adobe reader to read the content.

Good luck

better , you can use it by nuendo or cubase sx. over all you try it cubase device setup and click vst system or switch vst audio bay. for more help call me +8801711904316

Often, you just need to ensure that your computer's native driver is disabled, this is a common problem with audio interfaces and windows. Once this is done, make sure that your Tascam is set as both the input as well as the output device for all audio-based programs. If this doesn't work, get an M-Audio . . .
Hope this helps!

Im using Vista on a Sony Vaio FW11E with Core 2 Duo Processor. 3Gig ram. Its not working properly with me either. Its a loan of a mates. Ableton and Windows Media Player just keep stopping for a second every few seconds! Very annoying!

Are these problems that have cropped upover time, or is this a new installation?
accordianman

Hey lea,

i have a similar setup (Cubase LE & Tascam 144) and each time i start up Cubase i have to make sure there is no digital input going to the tascam. once cubase is started up but no project loaded i plug in my spdif from my DAT machine and then open my project and all is fine. does that answer part of your question?

i have a different problem though, i'm trying to record my DAT tapes which are recorded at 32khz and cubase doesn't recognize that sample rate properly. it'll record no problem, and play them back fine, but exporting always creates mismatched sample rates in the exported file. sucks big time and i have got no idea on how to fix it either.

Are you hearing the sounds from your speakers on your computer only?...accordianman

have you checked to see if the inputs are the Tascam
and the outputs are the Tascam i had the same issue when i first got it have a look in them settings and just see if there the defaults

do u have usb 2.0 prts in back use not front of pc those 1.1 ports ok cheak drivers on all tell your master sound drivers defult to tascam see what happends

you might want to downgrade to xp because vista uses alot of ram to run it. you could also get more ram. you need about 1gb and a half to 2 gigs to run most recording softwares and interfaces. i personally use vista cause i lost my xp disk and i got 2 gbs of ram and everything runs great, but if you really want to get into recording do what im doing and save up and buy a mac.


sincerely
andy kastrinelis
owner of addex recording inc.