My JBL docking station is no charging the ipods or holding them in place properly. Does anyone know where this can be repaired? I have tried several different connectors in the station but they all seem to be loose.

You can pick up an ipod docking station adapter here.

If your looking for the dc charging adapter here you go. This is a good universal ipod dock adapter.

try pulling the ipod out of the dock while both are turned on or unpluggin and re-plugging the adapter... works for me

Get one of these to sole your problem. ipod change their charging circuit I found one at Walmart in the ipod accessories section. Its called the Passport home dock adapter.
http://www.scosche.com/products/productID/1695

- this accessory supports charging for the iPhone 3G, iPod touch (Gen 2) and iPod nano (Gen4) with most iPod docking stations
- Snaps into any iPod universal dock and accepts universal dock adapters

my apple ipod is not charging what should i do plz help me [nano 3rd genaration]

The new SoundDock II charges your new iPod touch and is fully compatible all iPods and the iPhone 3G. Also the SoundDock Portable will do this. But..
Better news-> Call Bose. They can upgrade the 30-pin connector to charge via USB-only and function with the remote as well. $99. This will make your iPod touch 100% compatible and somewhat future-proof your SoundDock. If the SoundDock was purchased within 90 days (at full retail price), they will do the upgrade for a smaller fee or even free I think.. (new 1 year warranty given with repair/mod) btw- This is an Apple issue, not a Bose issue. All 3rd party iPod connection devices had to make this change at some point.

Sorry, it 'WILL NOT' charge a 4G Nano on this Dock no matter which adapter you use!!

Clear Adapters have small numbers on them which relate to different iPods - A reference sheet relating to these numbers is enclosed with the Adapter Pack!

These are different modes while connected to docking station and to computer through USB

This compatibility issue is caused by the same change with the Apple Dock Connecter introduced with the iPhone 3G. Inside the iPod / iPhone Dock Connecter are 30 metal pins. Previous iPods and iPhones allowed for charging either over pins reserved for the USB connection or pins reserved for the obsolete Firewire connection.
While Apple apparently announced this upcoming change to manufactures of “Made for iPod” accessories back in 2005, Apple only formerly discontinued Firewire charging support with the most recent iPods. New iPods and iPhones can only charge via the USB pin.
As such, there is no way that a software update can fix this issue in the future; this is truly a modification in iPod hardware.

I have had exactly the same problem having bought a JBL Radial Micro for my partner for Xmas for use with the Ipod Nano, i contacted JBL via their website and was advised to contact Harmen on 01707278100. I was advised that the new ipod nano (chromatic) would not charge on the JBL radial micro. They stated that this was due to Apple changing the charging pin in the new nano. I have since bought a JBL Stage III. I contacted Harmen before buying this and was advised that the Stage II would not work. Hope that this is of use.