Orion TVD2710. Lost remote, can't change signal input
Orion Model TVD2710 (not STV2763). Lost remote control and need to changes input settings so kids can play XBox. Defaults to 'Ant' and no obvious way to change. No front of right side panel manual controls that I could find. Only Channel/Volume/Power manual controls on Front. I found that if I hit Volume up/down simultaneously, a setup menu would come on screen but nothing to change TV inputs away from 'Ant'. I was able to program an 'All-for-One' remote to controls TV Channel/Volume/Power but nothing to adjust signal input setting.
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has written 20 answers of more than 400 characters.
Re: Orion TVD2710. Lost remote, can't change signal input
I would suggest you try to find a universal remote that has an "input" or "source" button and program that one to your tv. By pressing the "source" or "input" button, it will change the input to the tv.
I hope this helps!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It depends on the set on which is is used and if all the functions match on the remote for the model of the TV chosen. You have not specified the make/model of the universal remote as a referance to the make will confirm the case.
Tries use the front or right side panel manual controls panel.Use the Channels buttons UP/DOWN push the channels UP button couple time.U should get in Video 1 or 2 which ever ur video game console hook in.Or your tv might just have a manual video button,put that u in video 1 or 2.Try website 1-800-remotes Factory original to buy an exact remote ur problem solved.None the solutions,help.
According to the specs on that model, it does not have a digital tuner capable of receiving ATSC signals.
You need a converter to receive the digital signal and convert it to analog so that set can process it.
Unless you already have a 'black box' between your signal source and the Orion, you have never received 'digital' signals.
If your tv has S-video on the unit then yes you can plug it in from your S-Video out on your laptop. You will have to change the input on the tv. This will be done by hitting the TV/AV button on the remote, that is assuming this is an ORION stv2762. Otherwise it will be an Input, TV/Video, or AV button, or source . IF you have none of these then it could be as simple as pressing the Channel button down until you reach the AV channel. Make sure the laptop is on and then try changing through input's until you see the screen change to what the laptop shows. If you have more questions about this let me know.
You need to purchase either a replacement remote from ORION or Ebay, OR you can purchase a replacement universal remote and program it for your TV. Make sure the Universal remote you buy has an input or source button. Radioshack carries several for 8-15 bucks.
if you dont already have the remote set up then find the codes and t it up. the remote should have a button that says either tv/video or input. depending on the tv it should take you to a few channels through this button. look for either input 1 or 2, or even GAME. these should be the channels it will play on.