- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
turn it off, then press the "comm manager" and "voice command" button at the same time then press reset. When the screen displays
the message "Press Send to restore.", then press "Send" button. That should do a hard reset. try that first.
Hi Kumar, Nice to find u here . Do u have upgrade of XDA II Mini. I m on original version. Havent used this set in a while as i m on Iphone. So i was wondering if u can help?? Hoping to hear soon, Thnx
The digitizer on top of the lcd display is most likely faulty, try a hard reset, if it doesn't solve the problem the digitizer would need to be replaced.
To perform a hard reset
1. Press and hold the Comm Manager button and Voice Command
button on the device.
2. Keep the two buttons pressed, and at the same time, use the
stylus to lightly press and hold the RESET button.
flash arom directly from bootloader mode (by pressing camera ****. and keep press. then press with sylus the soft reset ****. ,
then the 3 colors shows with usb in left bottom site of screen of device then run the flash utility normally .