Power on lights etc push start button but it clicks and nothing happens

This is usually caused by either a bad door switch or a loose door switch mount, which are pretty simple problems to fix.

See these files:
http://031d26d.namesecurehost.com/mwd/safety.txt
http://031d26d.namesecurehost.com/mwd/disassembly.txt
http://031d26d.namesecurehost.com/mwd/doorsw.txt

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Oct 02, 2010 • GE Profile Spacemaker II PEM31 Microwave...

0helpful

1answer

Maytag MMV4205BAQ does not start. I can enter the time, power level, etc. but when it is time to press the start button nothing happens. Also, the interior light does not turn on and I no longer hear the...

Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

Sep 29, 2010 • Maytag MMV4205 Microwave Oven

1helpful

1answer

Microwave is not turning on. Power has been tested at the wall outlet and is fine but the microwave is completely dead - no lights and nothing happens when you push the power button.

Open the case and check the fuse on the floor of the unit near where the power cord enters.

Thanks for your interest in FixYa.com

Feb 19, 2010 • GE Spacemaker JVM1640SJ Microwave Oven

0helpful

1answer

GE Microwave Doesn't Work, Timer Ok

More than sure, the door micro switches do not work properly, they should be carefully checked.

Sep 24, 2017 • General Electric Microwave Oven

0helpful

1answer

The touchpad on my microwave has quit working.

possibly a stuck button which would mean a replacement pad, do the buttons bleep when you push them do some work and others dont its quite common normally its the start button or the cancel which goes(due to constant pushing) and it causes the error alternatively its a possible logic board fault which is far more expensive to replace!

Nov 12, 2008 • Microwave Ovens

0helpful

1answer

Nothing works, displays numbers 1 thru 4.

What you're describing sounds like a corrupted controller, or maybe there is some grease, etc. on the controller, maybe where the keypad plugs into the controller.

Can you post a video demonstrating what happens?

This sounds really odd!

Jul 19, 2008 • LG LMV1630ST Microwave Oven

Question 2

Anonymous

Master 1,871 Answers
Posted on Apr 04, 2010

Anonymous

Master

Joined: Nov 14, 2009

Answers

1871

Questions

2

Helped

492717

Points

5139

Hello :

This could happen because of bad door switch or a loose door mount .This is the main reason that microwaves not heat even if the other functions work fine .

Warning : A microwave is capable to give you a serious electrical shock even when it's unplugged , so I recommend you to call a repair technician for help .

good luck .

please rate !

Related Topics:

Trustworthy Expert Solutions

Power on lights etc push start button but it clicks and nothing happens

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

My sensor touch buttons don't work....any ideas why?

Frigidaire control panel has no power

Kitchen Aid Microwave Model KBMC140HSS03. All siystems go but when you push start nothiing happens, when you push cancel nothing happens. Repairman said it was the diaphragm and would cost $400 to r

Fan works, but doesn't cut off ...no light comes on, push buttons but nothing happens

When I enter the cooking time (2 minutes, 30 seconds for example) then push the start button, nothing happens. The start button doesn't click or have any resistance so I suspect it is defective since the...

Maytag MMV4205BAQ does not start. I can enter the time, power level, etc. but when it is time to press the start button nothing happens. Also, the interior light does not turn on and I no longer hear the...

Microwave is not turning on. Power has been tested at the wall outlet and is fine but the microwave is completely dead - no lights and nothing happens when you push the power button.

GE Microwave Doesn't Work, Timer Ok

The touchpad on my microwave has quit working.

Nothing works, displays numbers 1 thru 4.

Not finding what you are looking for?

NN-C994S Convection/Microwave Oven

My sensor touch buttons don't work....any ideas why?

Ask a Question

Top Panasonic Microwave Ovens Experts

ZJ Limited

Paul Bade

Jerry Naidoo

Are you a Panasonic Microwave Oven Expert? Answer questions, earn points and help others

Manuals & User Guides

. NN-C994S Convection/Microwave Oven...

Related Topics:

Trustworthy Expert Solutions

Power on lights etc push start button but it clicks and nothing happens

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

My sensor touch buttons don't work....any ideas why?

Frigidaire control panel has no power

Kitchen Aid Microwave Model KBMC140HSS03. All siystems go but when you push start nothiing happens, when you push cancel nothing happens. Repairman said it was the diaphragm and would cost $400 to r

Fan works, but doesn't cut off ...no light comes on, push buttons but nothing happens

When I enter the cooking time (2 minutes, 30 seconds for example) then push the start button, nothing happens. The start button doesn't click or have any resistance so I suspect it is defective since the...

Maytag MMV4205BAQ does not start. I can enter the time, power level, etc. but when it is time to press the start button nothing happens. Also, the interior light does not turn on and I no longer hear the...

Microwave is not turning on. Power has been tested at the wall outlet and is fine but the microwave is completely dead - no lights and nothing happens when you push the power button.

GE Microwave Doesn't Work, Timer Ok

The touchpad on my microwave has quit working.

Nothing works, displays numbers 1 thru 4.

Not finding what you are looking for?

NN-C994S Convection/Microwave Oven

My sensor touch buttons don't work....any ideas why?

Related Topics

Ask a Question

Popular Questions

ERROR CODE H97 ON PANASONIC MICROWAVE NNCD997S (Dimension 4 The Genius)

How do I unlock my panaosonic microwave

Panasonic inverter 900w microwave fault code h97

Panasonic Microwave Dimension 4 convection (11 yrs old)

How do I get my

Top Panasonic Microwave Ovens Experts

ZJ Limited

Paul Bade

Jerry Naidoo

Are you a Panasonic Microwave Oven Expert? Answer questions, earn points and help others

Manuals & User Guides

. NN-C994S Convection/Microwave Oven...