Question about Belkin (F5D7230-4) Router (587009)

1 Answer

Need id to log in to a belkin n - Belkin (F5D7230-4) Router (587009)

Posted by davidlwelch on


1 Answer

Ed Mac

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 731 Answers

Open your browser
in the address line type
A login box appears and unless you've changed it the login ID is admin with no password.
If you have changed it and can't remember it you'll need to do a reset to default by pressing and holding the rset button on the back near the WAN port for about 30 seconds

Posted on Apr 04, 2010


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I would like to know my password

Most routers let you log in by putting their IP address into the address bar of the web browser. however this can be done wireless but probably in your case, you might have to hard line to the router. linksys and cisco use and I think netgear and d-link use and Belkin uses routers require you to use login id and password before they let you use the interface. with older cisco and linksys routers it is usually ID/password admin/admin or admin/password. newer routers have unique login Id's and passwords that are generally located on a sticker on the bottom or the back of a router. once you log in, you want to go to a setting such as wireless security where it states what kind of wifi protection you have...WEP...etc. and that is where your wifi password is located....or just manufacture reset the router and follow the steps as mentioned earlier.

Aug 28, 2013 | Computers & Internet

2 Answers

Help me with my belkin router

In order to set it up, you need to connect it to your isp's modem via ethernet to the uplink port (the one port that is by itself). After that, connect an ethernet cord to your pc or mac- you should be able to get online since the router defaults to picking up IP by DHCP. If you wish to configure it further, log into it by opening a browser and going to
From there you can setup the wifi, setup port forwarding, etc.

I’m happy to help further over the phone at

Oct 03, 2010 | Computers & Internet

1 Answer

How do I turn off the security on my belkin wireless router? Thanks

Why do you want to turn it off?
Do you just need the password?
Whatever you wish to do, log on to your router, usually in your browser. sometimes
If you have not set different log in details, you usually leave the password blank, if not google " belkin+your model number default log in"

Aug 14, 2010 | Belkin Computers & Internet

1 Answer

Security key

Do you mean your default log in details?
here are some belkin log in details
If you mean what is your security key. Log into your router and set your security.
If using WEP security (Dont unless you have no choice, it is not secure) It gives you a passkey
If using WPA (use WPA2 if possible) you choose the password

Jul 30, 2010 | Belkin Computers & Internet

1 Answer

How to put password on a belkin n150 router?

Well use a browser and log on with the word admin as password & logon. This will open up the setup for your router. Also go here to get your manual.

Feb 07, 2010 | Belkin N150 (F6D4050) 802.11g/b Wireless...

1 Answer

How do i update the firmware on my belkin router?

On my router I have to log into the router while it is connected to the internet and select update Firmware. From there it does everything on it's own. If it ask for user ID and Password you can try User ID: admin Password:administrator if you don't have that information. If that doesn't work the only other method would be to activate the reset to reset the router to factory and then update and reprogram your settings.

Sep 11, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

I dont know how to find out which computers are using my wireless need to log into your Belkin Router...heres some advice I gave to someone looking to change the Channel on their Router, the same will hep you configure what you need to do as well...... The Belkin router's IP address is
but if this doesn't work for you, do the following;
Open Start Menu > Run and type cmd
Press OK
At the Command Prompt type ipconfig
Note the Default Gateway address that appears
Open your web browser and type the Default Gateway address into the Address bar. ( no 'www' needed.
You should get a login popup. You'll need to know the ID & PW to log in or if you didnt set one, just leave the box empty & Press SUMMIT

See the options in the left side boxes...
You will see at the top of the page a drop down box to select a new channel number...try 1, 6 or 11 first.

A word of WARNING: If you select a Channel (i.e. 10 like I did) that delivers hardly any'll finish up with no connectivity at all & unable to get back on the internet to change it to another channel.
So have a wired connection cable that you can plug into the back of the Router as a 'back up' to return to the net OR place your laptop (if applicable) right next to the Router for maxium detection of a signal.

Good Luck!

Mar 31, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

2 Answers

Belkin wireless g router

if you want driver give me mail id i will send the driver to your mail id

send your mail id to my mail ''[email protected]''

Mar 11, 2008 | Computers & Internet

Not finding what you are looking for?
Belkin (F5D7230-4) Router (587009) Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts


Level 3 Expert

4372 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides