I recently purchased a used dlink wbr1310 router. It worked without any issues, unti I try to filter some web sites through the setup. I was able to enter the web sites and save it. After that the routher stopped responding. It shows the power indicator and the internet. When I plug my pc into it, the indicator does not come on. Same goes with the wireless. I tried to reset it several times, but when I press the botton nothing happens. Could some one help? Any help is greatly appreciated.
Press the reset button and hold it down for 30 seconds. release it. wait for a minute. unplug the power and plug it back in. wait for a minute. Now try to open the set up page of the router.
connect the computer to the router and check the IP address on that computer. using the default gateway number, try to open the set up page of the router.
Click here for step by step instructions
Click Here to try step by step solutions.
Most of the users are using this web site for home network troubleshooting
×
I suspect that you have port forwarding rule (virtual server) on port 443 (https) on your router. Try to remove rule or just reset router to factory settings. I have the same router and this problem did not happen. You can also install Router Commander program to boost up router performance.
198 views
Usually answered in minutes!
tried this and it did not work
triedit and did not work
×