Question about Indesit W 123 Front Load Washer
It happens occasionally but often that in the middle of a wash program it gets stuck with the follow lights on:
I need to swicht it off,wait some seconds and switch on again.
Any other solution?
Sounds like you may have some moisture getting into the electronic panel but because it only happens rarely best not to try to fix. This is normally quite expensive as they need to replace electronic panel and seals around panel, so I would live with it.
Posted on Dec 13, 2017
the pressure switch should be easy to replace. it will be a round unit with wires going into it and also a small clear plastic tube attached. it is usually mounted around the top edge of the case. i would also check that the pressure system is not blocked (the other end of that clear plastic tube) as blockages may keep pressure at the switch leaving it in the "full position" pop the pressure tube off of the switch and force some air down the tube to check.tony.
Posted on Jun 03, 2007
Tips for a great answer:
Usually answered in minutes!