Noise,light copy with new cartg, scanning noise

hp website drivers and support,,may need new drivers

new cartridge or not.. its the inks!! nothing else.. are they o.e.m.? or aftermarket?

I’m happy to help further over the phone at https://www.6ya.com/expert/ron_9356d26241d4cbf7

Hi, have you had any luck repairing this? I also had this problem. I rang Lexmark support who, after 45min on phone, decided to send me a new machine. They did not want the old one back so I intend to try and repair it when I have time. I reckon the x9350 are prone to scan head problems as mine was making strange noises before it packed up and I have seen other reports of problems on various forums.

try checking if you have completely installed all the drivers for your printer. scanning and copying dont usually needs drivers because you can do that even without a computer. but scanning requires your scanner to be read by your pc. try checking for the scanner driver from the cd that came from your printer.

If under warranty contact mfg for warranty repair locations

remove and install the ink cartridges..then print a demo page (press photo and copy button at the same time)if the print of the text in the demo page is light or faded press the menu, scroll down until you see clean printhead then press the ok button, choose deep clean and press ok..after it clean try to print again a demo page and compare it to the other one if it has improvement try to perform again deep clean but if it has no impovement call kodak aio hotline 18004216699 and you might need a replaement printhead .

call in for warranty service

Try this link for more Printer Resources

what I've done is buy two ink cartges and then you can fake out the printer by installing them back and forth between the full cart and the empty ones. I like the option of refilling the cartges. What I did was take the cartges out. drill a small hole it the acess hole so I could refill each ink color and reseal the hole up (with a small plug) took a needle and heated it up. to make a small air hole for the ink to be able to get out (breather hole). then set them aside. I then took the two other ink cartges and installed them. faking out the printer to think that it had new cartgrs in it. tried to print some pages then put the filled cartges back into them. Some times you might have to do this a couple of times but once it takes all you do is to make sure that the ink cartges are ALWAYS FULL. I have been running for some time without haveing a problem. I hope this helps

http://www.nodevice.com/manual/newmans/1164257699mp750780smpdf/get13922.html

thats the service manual for your printer it contains detailed step by step instruction in trouble shooting and repair