Required help for solving Error E007 of Canon iR2116J
I have an Canon Xerox Machine, it was working properly but yesterday certainly it not working and a message shown that it has an error vide error E007. So, if you kindly advice me to solve the problem. I shall be grateful to you.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Fixing film sensor failure
The fixing film sensor is faulty.
- Check the connector of the fixing film sensor. - Replace the fixing film sensor. - Replace the DC controller PCB.
this is related to the teflon(fixing film) in the fuser unit. u have to replace it to get machine working . so better call a tech and get it replaced .u have to do so to make it working ,no other option.i can't explain u how to do so as it is trick and u might damage other parts and sensor's
You have to disassemble fuser unit and inspect a fixing film, if damaged - replace.
The official documentation says: E007 0000 Fixing film sensor failure The fixing film sensor is faulty. - Check the connector of the fixing film sensor. - Replace the fixing film sensor. - Replace the DC controller PCB.
Hi, wich is the error code that machine shows? i.e. E00002-000 You said that machine says turn off and on, these happens when the error code is present. And by the way do you mean IR2016J, 2116 do not exsist!
The erreor code E007 has to do with the fixing ***'y upper film ***'y or roller. It is saying that the film is not moving in and out of "HP" Most of the time it means that the fusing film is torn and not moving properly. If you are getting paper jams in the fusing area and or unfixed or smeared copies. You most likly need to have the fusing film ***'y replaced. It could also be that it is out of place and needs to be readjusted. The only problem is that it's a little tricky to get to and not a bad idea to have a new film to replace the old one while you have it out. Good Luck