Xreox workcentre pe 16 problem

Remove copy cartridge. On left top of cartridge there is a glass fuse. replace it with proper rating. it is meant for cart existence

You need to go to menu 'Advanced Fax' and turn 'Secure Receive' off.
Hope this helps.

my workcertre pe 220 scanner locked . how can i scanner unlocked?

YOU MUST CHANGE THE CHIP BECAUSE WHEN THE MACHINE SAYING THAT THE TONER IS EMPTY ALTHOUGH IT IS PRINTING IT DOESN'T PRINT THE FAXES

tried install the printer from its original cd

Recently I had to configure a 17" Aluminum PowerBook and a Xerox Workcentre PE 16. That multifunction laser monochrome printer is not supported by MacOS X, but I tried all the same.... and no glue for that, until I went on the Samsung webpage and noticed their SCX-4216F printer. This machine is the same as the PE 16.

So I downloaded the lastest drivers from Samsung's download centre (drivers for Tiger too), installed the drivers on the PowerBook (running 10.3.4), connected the printer and when I selected the printer ... tada! It automatically selected the Samsung driver, so I clicked on OK and started printing. Everything was OK!

But it doesn't end here: even the Lexmark X215 MPF has the same chassis as the Xerox and Samsung. Yet, on Lexmark's website there are no Mac OS X drivers, but Samsung's drivers work just the same. I hope this hint will help others...

menu - set default - copy - ok.

Remove the back cover. And looking from the back, remove the right side cover. There is a white ribbon cable and one connector with mostly red wires, remove and reseat those. Return power to the machine and see if it comes on.
If not, then remove the right side cover, the 2 screws that fasten the scanner to the frame, remove the scanner and then the controle consol, ( display.) then unplug all the connectors on the display and reconnect them.
It the display still does not work after reseating all the connectors, the display itself is defective.

Maybe your toner cartridge is empty

did you turn the printer on?