Where is a repair center on the North Side of Houston? For Boss Micro BR.

I know how to set it back to factory boss micro br.

Make sure the memory card you use is a MAXIMUM of 1 Gb as larger cards are not supported. Yes, the smaller cards are getting hard to find.

Chances are you need a driver in your PC compatible with Vista. There are MANY compatibility problems with Vista and special devices such as the Micro Br.

Google is your friend... finds it instantly...

Download manual from here:

http://www.roland.com/products/en/_support/om.cfm?PRODUCT=M-BR

Refer to your BR manual for procedure to format the card. Formatting the card in a PC just doesn't cut it.

Look in your index in the manual for "formatting" or "card"...etc.

You won't find a specific Micro Br Icon since it is a data transfer connection only.

Try going to "My computer" and it should appear similar to when you plug in a USB stick. It MIGHT have a meaningful name, but it might not.

Have you installed the correct codec for it? Go to Microsoft site or Boss.com and download the codec and driver for it.
Good Luck

I'm not sure which entry will get to you, so... The likely defective part is the voltage regulator. This should be fixble by any shop that handles audio gear. No special test equipment or parts are required. The regulator circuit should be fairly standard and simple. Where are you located so I can recommend a shop? Dan

Greetings I think you can download the requested operating manuel here: http://www.lifeismusic.co.uk/Products/video/manuals%20and%20specs/boss/microbr_om.pdf

Kind regards Fred.