My mouse won't pick-up my icons !!!

nop, that is the Federal Communications Commission Identification means that is your product ID no and not the model

No simply leave the mouse alone and it will "sleep". It only awakens when you move it again.

get the model number off the back of the mouse and keyboard and try to google for the driver

If you need further help, reach me via phone at https://www.6ya.com/expert/david_eb7ea98642566cc6

Also check to see if you have enough memory installed as this has caused problems for others. Bud

It's pretty universal for them to have a way to associate the mouse and keyboard with the receiver in a way that switches the channel or code it uses.  You can use that to get working, but obviously the keyboards' RF is esentially insecure.  Therefore, one of or both of you get to pick some more secure wireless stuff at the shop for the more permanent ability to get along.  If you're in a particular kind of business, you might need to look more carefully than in another.

im having simular problems but manage ome times by tapping caps lock,scrol lock and num lock from the momment you pc starts till the caps lock majes a noise, then i know its working, if mouse starts mocing slow and not clicking it is your batteries, got me mad this has and dunno how i aint smashed it lol

Here is the sequence to connect keyboard and mouse to receiver:

Press Connect button on receiver, and within 10 seconds press the Connect button under the mouse. Wait 15 seconds. Then press the Connect button on the receiver and within 10 seconds press the Connect button under the keyboard.

-- Thatpat

Could be radio interference from somewhere. I tracked my similar mouse problem down to emissions from the ethernet adapter that connects over the house mains wiring. Try the using the mouse close to the receiver, if it works ok interference is likely.

Try here


http://www.labtec.com/index.cfm/service/listing/AMR/EN,crid=68,crid2=1762

installation guide