Print problems Thank You for trying The problem is not with the printer, it prints fine on all jobs except Punch Home Design Pro. An example when printing a wall section, on one wall the line will appear as a 4" to scale solid line, on the same drawing the wall will appear as 2 lines 4" to scale apart and in another area a random shaded area will go through the center of the drawing.

Usually it is easyer to unplug the printer uninstall everything restart the computer and reinstall the printer ad driver rather than trying to find what the problem is ,
Make sure you read and follow Every Step provcedure of the installation process

You are not describing the problem.
There is a free tutorial at Punchhelpers or you can get their Printing ebook or their Training e-book

Yes, proceed to register according with the instructions provided by the manufacturer
http://www.punchsoftware.com/c-20-registration.aspx
These are the best resources for Punch Software solutions
Punch Software Community Forum
Punchhelpers Website
Learning Punch Software (R): Basic & Advanced Training
Learning Punch Software (R): Importing, Exporting and Printing
Punchhelpers at Facebook

Try to follow these guidelines in the manufacturer's website
http://support.encore.com/technicalsupport/kb.aspx?kb_id=1206&product_id=2723
These are the best resources for Punch Software solutions
Punch Software Community Forum
Punchhelpers Website
Learning Punch Software (R): Basic & Advanced Training
Learning Punch Software (R): Importing, Exporting and Printing
Punchhelpers at Facebook

You are not describing the problem, but these are the best resources for Punch Software solutions
Punch Software Community Forum
Punchhelpers Website
Learning Punch Software (R): Basic & Advanced Training
Learning Punch Software (R): Importing, Exporting and Printing
Punchhelpers at Facebook

The reason of the error 1305 is a bad download or a bad disk
Try to contact Punch TD or try to download your file again

If the problem persists, contact directly with Punch
http://support.encore.com/ the best resources for Punch Software solutions
Punch Software Community Forum
Punchhelpers Website
Learning Punch Software (R): Basic & Advanced Training
Learning Punch Software (R): Importing, Exporting and Printing
Punchhelpers at Faceboo

The reason of the error 1305 is a bad download or a bad disk
Try to contact Punch TD or try to download your file again

If the problem persists, contact directly with Punch
http://support.encore.com/ these are the best resources for Punch Software solutions
Punch Software Community Forum
Punchhelpers Website
Learning Punch Software (R): Basic & Advanced Training
Learning Punch Software (R): Importing, Exporting and Printing
Punchhelpers at Facebook

This sounds like a video card problem
Check this answer in the Punch Community Forum
These are the best resources for Punch Software solutions
Punch Software Community Forum
Punchhelpers Website
Learning Punch Software (R): Basic & Advanced Training
Learning Punch Software (R): Importing, Exporting and Printing
Punchhelpers at Facebook

www.amazon.com › ... › Printers › Inkjet

Two possibilities are the port configuration and the type of serial cable.

The printer has a feature that will try to match itself to the PC's configuration. Press and hold the feed button until the green status led flashes three times. While the led flashes send a ZPL format to the printer (hopefully you can do this through Design Pro by trying to adjust the printer or print labels, but the labels will not print). When the printer and PC are synchonized, the led changes to solid green.

If you can synchonize but still can't print, the problem might be the serial cable; not all serial cables will work. You should use a full null model cable (all pins connected except 1 and 8).