Jackson jp-24b purchased this machine used, cant figure out how to work it. I flip the auto cycle on, and then the power switch. The fill light turns green and i assume water is filling up in the machine. In the meantime there are two small red external hoses that hot water comes and i currently just have those hanging in the sink. At the same time, nothing is happening during the wash cycle, the wash gauge doesnt even move only the rinse gauge. Also when i try to drain it nothing happends (begin wash cycle and then flip switch to off/drain) PLEASE HELP

sounds like pump or motor failure

Before replacing motor check that the relay (2) is operating and is providing power to the motor.

The link is the manual for the washer. Check the wiring diagram at the later section page 62

Hope this helps?

https://www.jacksonwws.com/wp-content/uploads/2016/11/7610-002-49-79D_JP-24-SERIES.pdf

google the manufacturer for user manual and parts information
as for quality detergents there are catering and commercial cleaning outlets that will have the products that meet standards
you have to decide on the quality verses cost that still meets standards

they are located under the front panel of the machine they should be lablet , usually they are by the timer cam

contact knight chemicals

Your water inlet valve is likely leaking by. Could be something is stuck inside or possibly the valve is worn out. The Jackson part # is 04810-100-12-18. There may also be a rebuild kit available. You should be able to purchase this from your local repair company.

The problem is hard water. Go to www.dishwasherfilter.com. They have a new product out that solves this problem once and for all. It filters the water entering your dishwasher and removes the hard minerals that cause these spots. Very affordable and guaranteed to leave your dishes looking amazing every time.

I found the following Website for Manuals, Parts, etc. for Jackson Sanitizing Dishwashers JP-24, -24F, -24B, -24BF, etc. http://www.partsdirect.bz/manufacturers_list.htm. or under "PartsDirect.BZ" search in Google. They also have 120 other manufactures. I was looking for part.

Before you can look around you first you have to join their free membership at which time you create you own "User name". Once you log on to their membership they'll email you back a password. Enter you User Name and the new Password they assign you and your in. Hint: they ask you what your Company Name is when you join. I just typed "self" and I was off and running. So you don't neccessarily have to be a Contractor, Company, etc. to get in. Just FYI.

Another helpful hint if you're looking for a part. Just click on "General Search", "Jackson", "JP24BF Dish Machine" and there are about 24 sections of exploded views with part numbers. Look this up under "___ Dish Machine" first and you'll save lots of time. Hope this helps...

no there is no seal keep the wash arms clean if the last hole gets stopped up then it will spin backwards and cause it to come off
otherwise go to home depo and get a oring that fist over the threads on the breaing and tighten by hand and you should be good
i have worked on these machines for 12 years