Timex 1440 Nylon watch Logo

Question about Timex 1440 Nylon watch

3 Answers

How do I get my Timex WR50M watch out of the 24 hour (military) time and back to a 12 hour clock?


Hi, How do I get my Timex WR50M watch out of the 24 hour (military) time and back to a 12 hour clock? It seems to have put itself into military time one day out of the blue, and I can't find a way to get it back. Thanks!

Posted by alpinewmn on

  • 3 more comments 
  • Anonymous Mar 13, 2014

    how to get it off military time

  • Anonymous Mar 14, 2014

    set time on timex wr50m

  • Anonymous Mar 22, 2014

    Change military time back to normal setting

  • MiM Hmr
    MiM Hmr Jun 03, 2021

    Worked great on my timed WR50M

  • Anonymous Jul 25, 2021

    For a WR50M, just tap the set button. That cycles it between am/pm and 24 hour modes.

×

Ad

3 Answers

Barbara Phillips

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 29 Answers

Hold down the adjust button bottom right then press the mode button top left you will notice the a or p that stands for am/pm will disappear & reappear. If you have an a or p on your display then you are out of military time.

Posted on Mar 12, 2008

  • cmyers766 Aug 04, 2011

    How do I can the time on a 12 hour watch, my watch is 1hour slow. not change from daylight saving time

×

Ad

Greg

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

This happened to me. I was pretty frustrated because I have bought many Timex watches and never had this issue. I stumbled onto the answer. Tap the set button and you should toggle between 12 hr and 24 hr settings. I did not find it at first bc I kept holding down the set button to find the option within the mode options as found in other Timex watches.

Posted on May 29, 2018

  • Anonymous Oct 12, 2019

    jesus christ i was messing around with that watch for a week and finally found YOUR answer. THANK YOOOOOOOOO!!!

  • Andrea Belisle Hood
    Andrea Belisle Hood Oct 15, 2020

    Wow. Thank you. Thats way easier than the other answers haha. Thanks for sacrificing weeks of frustration for the rest of us.

×

Ad

MiM Hmr

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This worked great!

Posted on Jun 03, 2021

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How do reset a shake n wake to 24 hour time

SHAKE N WAKE: TO CHANGE TO MILITARY TIME
Hit Mode 3 times to set the time
Hit Reset/TimeSet twice to make hours flash
Now keep hitting StartStop/Adjust repeatedly. After you go through 12 hours of AM then 12 hours of PM it will start going through the hours in military time.
4helpful
2answers

How to change a timex wr50m from military time to regular time

in the setting after you have set the date, you have to choose whether 12 or 24. choose 12.
Jul 14, 2011 • Watches
1helpful
1answer

My timex indiglo Ironman triathlon watchhas twelve hours of military time and then twelve hours of regullar time. HOW CAN I GET RID OF THE MILITARY TIME AND GET ALL TWENTY FOUR HOURS OF REGULAR TIME???...

Actually all the hours are military time. They are the same for the first twelve hours of the day. If you go through the setting procedure it will ask you if you want "12" or "24" hour time. Select 12. "24" is military
3helpful
1answer

How to change from military time back to regular time on a digital indigo watch with 4 adjustment buttons?

Thank you for contacting FixYa.<br /> <ol id="ecxintelliTxt"> <li id="ecxjsArticleStep1"> Press the "MODE" button---usually on the lower left side of the watch, but sometimes on the right center side---to cycle through to the time display.<br /></li> <li id="ecxjsArticleStep2"> Press and hold the "SET" button---usually on the right lower side of the watch---until the seconds flash.<br /></li> <li id="ecxjsArticleStep3"> Press "MODE" repeatedly to cycle through the displays that flash: from hours to minutes to month to date and day. At the end of the cycle is the hour display option. Make this option flash.<br /></li> <li id="ecxjsArticleStep4"> Press the "SPLIT/RESET" button below the face of the watch to change the hour display option to "24-hour display." This is the same as military time. If there is a "NEXT" button on the upper-right side of the watch, use this to advance to the 24-hour option instead of using the "SPLIT/RESET" button. You may need to press a "START/SPLIT" button instead a "SPLIT/RESET" button to cycle between 12- and 24-hour display. The "START/SPLIT" button could be located below the watch face or on the upper-right side of the watch, depending on the model.<br /></li> <li id="ecxjsArticleStep5"> Press the "SET" button again. You are now done. All PM hours should be displaying hours between 12 and 23.<br /></li></ol> Contact TIMEX for further assistance at:<br /> http://www.timex.com/info/Product_Instruction_Guides_Downloads
4helpful
1answer

How do I get the watch to change from military

Get manual here from my tips and tricks.
0helpful
1answer

Timex 1440 time from 24 hour clock to 12 hour

Hi bowingman,

To use 12- or 24-hour time for your watch, please follow the instructions below.

1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.

2. Press the "Date Advance" button on the upper right side. This will reset the seconds.

3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.

4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.

5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.

6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.

Hope it helps.

Thank you for using FixYa.
0helpful
1answer

Time confusion

Possibly you can change it back by pushing the hour-setting button through a 24 hour cycle--you can see if you are on military time during the PM part of setting it. If it's on military, just keep pushing till you start over at 12 am again (hint: that's 0:00 in military.) At least, that's how it is on my watch.
26helpful
5answers

Timex Mid Size Sports 1440 WR50M

If your set up is: Top-Left=Indiglo Top-Right=St./Stop Bottom-Left=Mode Bottom-Right=Lap/Reset

Than follow these steps:
1. Press Lap/Reset and hold. You should see the time the alarm was set for.
2. While holding Lap/Reset, press Mode.
3. Let go of all buttons.
4. There you go!

Hope that was a help
4helpful
1answer

24 hour-12 hour time

Press Set - hold (top Left button) -When the sec start flashing go to the bottom left button press it 3 times -When the hour flashes press the bottom right button 1 time -Press the top left 1 once with
Not finding what you are looking for?

18,007 views

Ask a Question

Usually answered in minutes!

Top Timex Watches Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2029 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Paul Bade

Level 3 Expert

1744 Answers

Are you a Timex Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...