Samsung how to remove stand

Look for holes in the back of the TV just above the stand. There are screws in those holes that hold the stand on. Shine a light in one to see what kind of fastener it uses. Some are phillips head screws, some use hex head screws. Locate the tool necessary to remove the screws and take all of them out. Have someone help you hold the stand while you lift the TV off the stand.

I hope this video help you:
How to Attach or Remove the Stand for Samsung LED TV
Samsung HDTV Troubleshooting 2011 LED TV Stand Assembly

if there is no screw on the bottom of the stand that u can remove there is usually plastic clips that hold the stand in place.

should have a couple of screws holing stand in place. remove screws then lift tv off of stand

Remove stand from samsung b2430hd lcd tv monitor Google Search

https://electronicshelponline.blogspot.com//

in most cases set has to very carefully be laid on a padded surface face down and the bolts removed to take the stand off.

its a snap-type plug-in stand, just hold the stand firmly and pull the monitor equally upward, then it will snap quickly....... but a proffessional reminder! Before mounting your SyncMaster on a wall, be sure to plug the two (2) stand holes located at the buttom of the monitor. My Samsung SyncMaster 2333HD LCD TV was twice intruded by adult-size lizard, both incident resulted to main power board damaged!!!!

Mounting on the wall, be sure use the short screws and no power tools. Hopefully it can help you and get a good commend.

Remove the screw and pull the TV upwards.
Have someone step on the stand

Place the tv on its screen flat on a soft surface,
you need to remove all the screws, not just the stand one marked.
Lift the back panel and then you will be able to slide down the stand, when you have removed the back cover you will also see where how your wall mount will fit to the chassis.
Place all the screws back on the back lid.