Have eco drive model number EG3 / cal G67. I need to reset time

I'll need more information about the watch. WR200 is not the model number. It is the depth in metres it is water resistant to.
The serial number is usually engraved on the back plate of the watch. The bit against your skin when you're wearing it. It's the number marked in red in the photo I've attached. Is this a digital watch, a watch with hands or does it have both?
Comment below with the serial number and I'll try to help you more.

The time on these watches has to be first properly referenced to UTC. I do not have the instruction book for your watch or even have a clue to the model number since you did not put any model number. There are several dozen Eco Drive models in each of the Citizen and Casio, and other type watches that are solar powered.

I have several types of Sky Hawk watches in the Citizen, and similar ones in the Casio. Check your instruction manual about how to set the UTC time, and how to set the offset time for your location. Once properly set up your watch should stay on time. If you have the radio receiver in your watch for the auto time setting, once the watch is set up properly it will maintain proper time all the time.

I have a new Citizen watch with World Timer. I want to set the time manually and turn off the world timer. I never want to receive the signal..... The book is no help.

Try going to the following link http://www.citizenwatch.com/COA/English/technicalinfo.asp?caliber=E812&ModelNumber=BL5290-59E

This model should have similar operating instruction to yours.

Download the PDF file for instructions.

DO NOT TRY TO CHANGE THE BATTERY! There is no battery! Eco drive watches have a capacitor that is charged by light! Put it in a sunny window for a day OR set it under a cool light. Check it often to see if it starts working, if after a few hours its still not running then take it to a local watch repair business. Its possible that the capacitor is bad. They are also very difficult to set so you will need your manual if you want to attempt it on your own!

http://www.citizenwatch.com/COA/English/settings.asp

You can find your model number on the case back! We use their site often at our watch repair business!

Hi

Peter I have not come across this watch before, but stumbled upon this website, hope it helps?

http://www.watchliquidators.com/BLE71.html

If you need to know more about the Eco Drive, look for detail tech manuals for all types here: http://www.citizenwatch.com/downloads/tech/tech.htm

try this link:

http://www.citizenwatch.com/COA/English/settings.asp

Rate, please.

Just pull the crown out, turn it so that the bottom analog display is set on "CAL" and push crown back in. Voila!!

Go to this link and pay particular instructions on how to find your watches movement or caliber number.
http://www.citizenwatch.com/COA/English/settings.asp