Install instructions for canon s630 printer

CANON K10380 INSTRUCTIONS Pdf Download.

www.manualslib.com > Brands > Canon Manuals > Printer

View and Download Canon K10380 instructions online. PIXMA ... K10380 Printer pdfmanual download. ... Canon pixma ix4000: install guide (16 pages).

When the MX300 printer driver installed, will automatically be installed Canon MP Navigator. Canon MP Navigator function to activate the scanner. Try to search for Canon MP Navigator icon, on the desktop or START menu.

If Canon MP Navigator is not installed, you can download here Canon Service & Support. Open link, then select the operating system you use, download Canon MP Navigator, then install.

Good Day Dany!

To install the Canon PIXMA MP190 Photo All In One Printer driver, download the version of the driver that corresponds to your operating system by clicking on the appropriate link below. A window should then show up asking you where you would like to save the file. Save the driver file somewhere on your computer where you will be easily able to find it, such as your desktop. Then follow the instructions below corresponding to the file type that you downloaded.

Go to the location where you saved the file and double click on the file. Then simply follow the on-screen instructions for installing the driver.

1. Canon PIXMA MP190 Windows 2000 Printer Driver Download

2. Canon PIXMA MP190 Windows XP Printer Driver Download

3. Canon PIXMA MP190 Windows Vista Printer Driver Download

4. Canon PIXMA MP190 Windows 7 Printer Driver Download

5. Canon PIXMA MP190 Windows XP 64-bit Printer Driver Download

6. Canon PIXMA MP190 Windows Vista 64-bit Printer Driver Download

7. Canon PIXMA MP190 Windows 7 64-bit Printer Driver Download

Are you sure you downloaded the right drivers, and the one's needed for your OS? Please check the canon link here. I would try reinstalling them just because your system is seeing the wrong printer to begin with.
The error message in the print queue can be troubleshot by using the windows help & support print troubleshooter (available from control panel>printers & faxes> printing troubleshooter) or using the windows event viewer to see what error code is reported and tracing the cause of the error that way...
Frequently in such a case uninstalling the printer drivers and installing them again will correct the difficulty...also see this MS link.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here: Official Canon Drivers and Software or Canon USA:DRIVER & DOWNLOADS

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then ifyou get in troubles, followthe instructions below to reset and reinstall drivers:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website, or use the disk and run the install file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

Note:someprinterdoes not work on Vista, if you do not find any driver downloadfor Vista on your model page, that means your model is not Vistacompatible.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Canon Drivers and Software

Aweb page will open, follow instructions, select model, then operative system etc.,go to next page twice, find file, and click on download .
Chose to download the file in my documents when asked.
Afterdownloading,find thefile,double click on the file with the mouse, ifyou get in troubles,then follow instructions below to reset andreinstall:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website and run the file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

Note:some printer does not work on Vista

I assume you are talking about a Canon printer here, if printer is not canon, then submit the question again, with the right make and model information.

If you do not have the disk you download software from Internet, follow instructions below,

Click here:Official Canon Drivers and Software or Canon USA:DRIVER & DOWNLOADS


A web page will open, follow instructions, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
Afterdownloading,findthefile,doubleclick on the file, if you get introubles ,thenfollowinstructionsbelowto reset and reinstall:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website and run the file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

Note some printer does not work on Vista.

If you do not have the disk you download software from Internet, follow instructions below,

Click here:Pixma ip1700 Canon Drivers and Software

A web page will open, follow instructions, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
Afterdownloading,findthefile,doubleclick on the file, if you get introubles ,thenfollowinstructionsbelowto reset and reinstall:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website and run the file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

Note some printer does not work on Vista.

hello
you find your printer drivers here choose printers and then s630 model, then choose OS and download the driver then just run and install :)

good luck get back to me if you need more help

Follow these instructions carefully. Not 100% guaranteed to work. Remember - you must have printer connected by parallel cable and use LPT1 when asked. If this works just remember you'll most likely only be able to print. I'll check to see how it turns out. Choose the printer the instructions say to choose. Except the very last dtep you can name it whatever you want. Take your time, do it right. Doesn't take long.

Use the following procedure to place the MultiPASS in Printer Mode. When finished, install an emulation driver.

1. Press the <Menu> button on the printer's operator panel.
   
   
2. Press the <SCAN> button.
   
   
3. Press the <COPY> button.
   
   
4. Press the <SET> button 2 times. The display will display [PRINTER MODE].

Note:

• After the printer is set to PRINTER MODE and the parallel cable is connected at both ends and the computer is booted into Windows, Windows Plug and Play will detect and automatically install the Canon Inkjet S630 printer driver. If the S630 is not installed automatically, install the emulation driver manually.
  
• After printing is completed, disconnect the cable from the printer and then disable PRINTER MODE.

Installing an emulation driver
The Canon Inkjet S630 emulation driver should install automatically once the F50 is set to Printer Mode, the cable is connected at both ends and the computer has booted into Windows. If not, the driver can be installed using the ‘Add a Printer’ function in the Printers window (See steps below).

1. After setting the MultiPASS to Printer Mode and connecting the interface cable, power on the computer.
   
   
2. If the 'Found New Hardware' window appears, cancel it.
   
   
3. Click the 'Start' icon, , click 'Control Panel' and then click the appropriate link or icon depending on the view.

• Using Normal Vista View :
  
  
• Using Classic View :

1. Click 'Add A Printer'.
   
   
   
   
2. Select 'Add a Local Printer'.
   
   
   
   
3. Select 'Use an existing port' and 'LPT1: (Printer Port)', then click 'Next'.
   
   
   
   
4. Select 'Canon' as the Manufacturer and select Canon Inkjet S630.
   
   
   
   
5. Type a name for the printer if desired, check the Set as the default printer box if you want the printer to be the default printer and then click 'Next'. The printer driver installs. If a Printer Sharing window appears, select 'Do not share' and click 'Next'.
   
   
   Above example shows Canon Bubble-Jet S400 in the Printer name field.
   
   
6. When the installation finishes, click 'Finish' or choose 'Print a Test Page' to test the printer.
   
   
   
   
7. After printing is completed, disconnect the cable from the printer and then disable PRINTER MODE. To print again, set the printer back to PRINTER MODE and then reconnect the cable.

Disable PRINTER MODE:

1. Press the <Menu> button.
   
   
2. Press the <SCAN> button.
   
   
3. Press the <COPY> button. The display will show [DOS PRINTING]
   
   
4. Press the <SET> button. The bottom row on the display will show [ON].
   
   
5. Press the left or right arrow to select OFF and then press the <SET> button.