My harman kardon soundsticks base light flickers, no sound

Something must be damaged or in need of cleaning.

unfortunately my man you've burned the amplification board of your device..You ought to contact the dealer you've bought it.There is a warranty for a period of usage.Good Luck!

yes it can....try to search in the internet what converter you will need...

POSSIBLY YOU PLUGGED YOUR SPEAKER ON A WRONG HOLE, PLEASE RECHECK.. GIVE ME FEEDBACK IF THIS HELPED.

hi , i have the same problem with soundsticks II, they just won´t work anymore,,,,the light is still on in the sub but there is no sound coming out of the speakers.....it happend after i moved my computer from one room to another.....

Your Codec is damaged. Reload your drivers for your sound card. First uninstall the old ones. Moving your non working speakers and they play fine says they are good. I have a problem that you have new speakers and the problem went away. Drivers do not care what speakers are on the other end. It only produces output. Now that your second pair is working correctly, put back the Harmons and see if the problem comes back

Mike

Hello there

First things First:
1) check cables, and the input cable to your PC.
2) Check for right voltage, may be somethings is chargind a lot**
3) Power regulator on the Speakers is damage.
4) RMS your Spks, for replace. or warranty.
5) try in another computer. ( if apply)

Hi, Kazim
Firts things First:
1) check connector for 2 way sound. you can use a headphone for this.
2) you also buy Ipod dock sound speakers, there is Ihome speakers, great ones, for less than 25.00 dollars.
3) you have to see balance on those speakers.
good luck

see the spk wire are properly conncted. bye

use a clear silicone based sealant (similar to the type used for caulking and in fish tanks) I'm guessing you used CA or superglue, and thats what melted your plastic, you're using too much also most likely.