Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

Machine will not spin or drain water.

Fisher and Paykel top loading machine, approx 6kg.

Machine runs wash cycle ok but stops at the rinse cycle and will not drain water or run a spin cycle, it makes a noise like it is about to start but after a couple of minutes starts beeping.

Model MKT Product
MW512NZ 92194-A

Serial No.
RYN635404

Posted by mattzx on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

I have a problem with my MW512AU. Sometimes it drains after wash cycle, but sometimes it sticks when it goes to spin, doesn't get up to speed, water comes on for about 10 seconds and shuts off, and it tries to spin again. If I hit the wash progress switch it goes directly to final spin and works ok. I then have to run a 2nd wash cycle to rinse the clothes. I also noticed a buzzing sound when I turn on the power point, which lasts about 3 seconds before stopping. It will come back on every 3-4 minutes for 30 seconds. This is with the machine power switch off. It powers on normally.

Posted on Sep 19, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Elba washing machine, when reaches the rinse cycle, water is very loud, never before, but it never stops adding water. Water is draining fine but water does not stop to cycle to rinse.


The water inlet solenoid valve is being held open. Take off the hose and look in the opening to see if you can find anything. Otherwise replace that solenoid valve.

Sep 02, 2016 | Fisher Paykel Fisher & Paykel Elba 3.7 cu...

1 Answer

Machine stuck in drain mode, beeps, can only turn off at powerpoint.


Your motor controller board is faulty
needs repair or new/recondition board.

May 06, 2013 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Fisher and Paykel 7.5 washing machine keeps powering off during rinse and spin cycles


The pump has a thermal safety cut out on it.
If the pump gets too hot it cut out.
Just put a new pump in and your all going again.

Aug 05, 2012 | Fisher and Paykel Washing Machines

1 Answer

My washing machine wont drain the water out before spin cycle it stops and turns off after wash so when you open the lid its still full of water


Hi just read your posting.Now you said in your posting it does not drain before the spin cycle, but does it drain before the rinse cycle?Does your machine stop and beep and show an error code in your LCD display or if you have the other model a series of lights?Have you tried advancing the cycle to spin and pushing the start button?Please reply with additional information and I can help you track down this fault.

Jun 27, 2010 | Fisher and Paykel IWL12 Top Load Washer

2 Answers

Fisher Paykel washing machine model # GWL15 drips


Hi Dale..
It sounds like you have a leaky inlet valve assembly. The part number is 421029P and is easy to replace. You can get one here:
http://www.fisherpaykelparts.net/ecart/item.php?item_id=266&category_id=56

Apr 20, 2009 | Fisher and Paykel GWL11 Top Load Washer

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

1,358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

peter gittos
peter gittos

Level 2 Expert

247 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...