My hp w1907 monitor has suddenly stopped working!!as soon as i turn on the tower it just displays"monitor is going to sleep"PLEASE HELP!!!

When i turn my computer on my monitor keeps saying no vga input and no dvi input then the monitor says going to sleep ..........PLEASE HELP ME!!!

Control panel > Power options > Choose power plan> set to Never turn off display / Never put monitor to sleep
(For Vista... XP similar) Not sure about Win 7, will not be much different

DVD Issues, possibly the media being used, only real way is to try another DVD drive in the tower

so if you test the monitor on a known good PC it does what?
fails, then its the monitor
works then its the failing PC

all old HP monitors pre 2010 many had a sleep timer
so push the menu key on the monitor
then look for sleep timer and turn it off,
the monitor defaults to that mode, so dont push reset monitor or bam back to sleep mode it goes. so turn it off again.
all this is in the manual, lost yours, wana read it first?

read page 4.7 see that? (osd +advanced +) power saver OFF

https://www.manualslib.com/manual/418165/Hp-W1907-19-Lcd-Monitor.html?page=25#manual

if that fails to fix it (tested on 2 PC ) the PC1 is bad.
that be a whole other WALL OF TEXt, ask.

To resolve the issue, please follow the steps mentioned below:
1) Go to Control Panel, click on "System".
2) Then, click on "System Protection".
3) Then, click on the "Advanced" tab.
4) Then, click on the "settings" under Performance.
5) Then, select the "Data Execution Prevention" tab.
6) This is where you can disable the "explorer.exe has stopped working".
7) In the Data Execution Prevention tab, select "Turn ON DEP for all programs and services except those I select" option.
8) Then, click on the "Add" option.
9) Then, you have to select the explorer.exe file manually.
10) the "explorer.exe" file will be located in the C:\Windows folder.
This might be a lengthy process, but this will resolve the issue.
If you have any difficulties, you may contact me through my Email address.
[email protected]

try to connect the monitor to another working PC, or to a laptop monitor socket, if it works there... then there is a prblem on you PC display driver or display card inside your PC, try to connect another working monitor to you trouble PC and check if that works.

If you set the PC to go to sleep after certian amount of time than it will not put out signal to the monitor. You need to go to display properties (right click on the desk top)/screen saver -power/set the display to never turn off.

right click on desktop select properties(screen saver ) select monitor button in that select turn monitor never.(configure carefully)

hi

please try to take the computer in safe mode and then try to change the setting in display center and try to chage the value of power option and your computer monitor would be out from the sleep mode

Sorry to her about your Monitor problems.
In the feature it would help to know what kind of monitor, the brand and model.
If this is a option, turn the monitor on, when you get image on the screen, press the menu key and scroll around until you find factory setting.
Restore to factory setting may bring the unit back and out of sleep status.
Try it, it may work..!!!
John Ray
[email protected]

Readers, please rate our information. Even if you disagree, it lets us know that you are responding and reading what we have taken the time to give you.
Thanks,

Check your owners manual for the power saving controls. In this section this should explain how to stop the monitor from going to sleep, or at least allow you to to set the timing for it. If this does not work visit the HP website and search the common problems for your model of monitor. search for this problem and the solution.If all this fails, seek help from HP technical service. Hope this helps.