Question about Behringer Xenyx 1002fx Mixer 10 Input 2 Bus with Efx

3 Answers

Iam trying to make my behringerXENYX 1204fx mixer, / connect

IM trying to make my behringer XENYX 1204fx mixer, / peavey pa-400 system, / windows xp desk top, all work together as one,but my brain is not working with me. So , my brain and i need someones better brain to help me solve this problem. THANKS,FOR YOUR HELP~~ppppppp.

Posted by lavearn on

Ad

3 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have trouble my new behringer xenyx 1204FX VU led dead , like new VU it must play , how to repair this unit VU light

Posted on Mar 24, 2010

Ad

savio_jacobs

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

How do i connect my cd players and laptop to my beringer 1204 fx mixer.....and then to a power amp for speakers. not sure where to begin or what leads goes where....

Posted on Apr 22, 2011

Ad

John Muana

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 75 Answers

From the mixer mains output u should have  two TRS jack output terminals or  XLR type (round socket with 3 little holes)  (sometimes they call it balanced output/input terminals). 
1. buy 4 cables of  TRS (1/4" size / 6.35mm)connectors
2. two nos of 6.35mm to 3.5mm TRS adapter that has two 6.35mm socket on each adapter. one adapter is for input to computer from the mixer and the other adapter for output from computer to power amp.
3. connect one TRS adapter to audio input port on computer and connect with mixer mains output
4. connect one TRS adapter to audio output port of computer and connect to with power amp input.
5. each connection will have 2 balanced input to computer and two balanced output from computer.
       So, the main idea is -  from mixer to computer and from computer to power amp. If u have six audio ports u can connect left and right channel on two separate ports for both input and output. This u have to configure from ur PC. 
      Left /right input on one port and left/right ouput from one port also works well.
3.5mm TRS is the one used on most headphones
2.5mm TRS is a miniaturised version usually used for mobile phone headsets. 
 

Posted on Mar 13, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No effects output xenxy 1204fx


Likely needs the DSP board replaced. It is the small board held on by 2 screws(if I remember correctly) and is easily replaced. I think retail cost is about $30 and can be ordered directly from Behringer.

Aug 03, 2013 | Behringer Xenyx 1204fx

1 Answer

I have a Behringer 1204FX mixer. It has an intermittent fault whereby the power supply pulses on off on off etc etc. This can continue for two minutes or ten minutes quite randomly.


That is known as :squegging". It can be caused by any of several failures. One failure involves overload that trips the overload sensor. Another is a problem in the feedback loop of the regulator. I would first replace C13 on the power supply and maybe C10. When working on these supplies use an isolation transformer for personal safety. Note that it appears that C13 MAY have too high a voltage rating and if an electrolytic the dielectric can deform and electrical value reduce. There are many other components that could cause the problem.

Nov 16, 2011 | Behringer Xenyx 1204fx

1 Answer

Best way to connect 2 1204FX mixers together


Try running the tape out of the slave to the tape in of the master unit. This us haywire, but should work. Use a stereo RCA cable.

Aug 08, 2011 | Behringer Xenyx 1204fx

1 Answer

I purchased a PV12M monitor and was wanting help connecting it to my Behringer xenyx 2442fx mixer


You will have to have an amplifeir between them since the PV12M is an unpowered speaker. The Xenyx 2442FX is likewise an unpowered mixer meaning it cannot directely drive a speaker. You will wire with a balanced line (TRS cable) between the 2442 and the amp and then from the amp to the speaker using a speaker type cable.

Jun 06, 2011 | Peavey Pv12m 12' Floor Monitor

1 Answer

Im trying to connect a peavey kb300 with a mackie micro series 1402-VLZ 14 channel mic/line mixer


The mixer is stereo and the amp is mono. The line level out of the mixer MAY overwhelm the KB2 regular inputs so try running the mixer into the PA input jack.

Apr 27, 2011 | Peavey Kb 2 Keyboard Amplifier

2 Answers

Beringer Xenyx 1204fx emits a clicking sound... Sounds like a Geiger Counter for radiation in my headphones. I have used the same sound mixer in the same configurations for 3 weeks. Now I've had it...


This is likely a problem with the FX in the unit or the power to it. Does the FX display act correctly? Check that the headphone source "Main Mix" is the ONLY button down for the headphones. If not, make it so. If the clicking is still there, try the headphones in the aux send jacks... see if EITHER left or right can hear the clicking. Back in the phone jack, scan across the SOLO channel buttons down one at a time. Is there clicking? If not, the problem involves the mixing buss or further down the line. Make sure the SOLO buttons at the FX Aux sends are up.
What effect does the MODE button have in SOLO and in PFL? Is the SOLO LED off? Is the number in the FX window SOLIDLY on and not flashing?

Apr 05, 2011 | Behringer Xenyx 1204fx

1 Answer

I have a behringer xenyx 2442 USB and can not get the sound to my daw. I can see and hear sound from the desk so I believe that side of things is ok. I've gone to setup devices and selected behringer usb...


First thing to check is look in the Windows Control Panel at the the "Sounds and Devices" and verify that the 2442USB IS the device for both input and output instead of the usual PC audio devices. You should see a pulldown list including both for those... If not, your SW driver is NOT loaded properly.

Dec 26, 2010 | Behringer Xenyx X2442USB / Harbinger...

1 Answer

Im try'n to hook a ''Duel fex pro'' multiband sound enhancement processor model ex 220, to my berhinger xenyx 1222fx mixer?


Use four (4) TRS cables. Connect from the
AUX "send" (left and right) to the input of the effects unit with two of the cables. Use the other two cables to connect from teh effects out jacks to the AUX "returns" left and right.

Mar 23, 2010 | Behringer Xenyx 1002fx Mixer 10 Input 2...

1 Answer

Do I need to connect the Xenyx 1202 to an amp?


If you are the only person listening, you can use headphones with the headphone jack. Otherwise you will have to use some sort of amplification and speakers,e.g. P.A., stereo etc. I'm using a Xenyx 1222 FX and am quite happy with it.

Mar 22, 2009 | Behringer Xenyx 1002fx Mixer 10 Input 2...

Not finding what you are looking for?

Open Questions:

See all Behringer Xenyx 1002fx Mixer 10 Input 2 Bus with Questions

Behringer Xenyx 1002fx Mixer 10 Input 2 Bus with Efx Logo

860 people viewed this question

Ask a Question

Usually answered in minutes!

Top Behringer Music Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

Are you a Behringer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...