I just want to connect to the net when I hook up my USB. HOW DO I? Or can I?

if you want to connect internet to pc through mobile(htc wildfire) after connecting the USB
go to
>settings
>wireless and networks
>tethering and portable hotspot
>check the USB tethering

thats all drivers will be installed and u can browse the net

There could be some print jobs stuck in the queue. Please follow steps below to fix the problem:

1. Browse to Start -> Run... and type in "NET STOP SPOOLER" (this will stop the print spooler service)

2. Browse to your windows\system32\spool\PRINTERS\ folder. You should see files there ending in .SPL and .SHD created around the time you tried to print - delete these files.

3. Browse to Start -> Run... and type in "NET START SPOOLER" (this will restart the print spooler service)

4. Double click the printer icon in the lower-right corner of your taskbar to examine your print job queue and browse to View -> Refresh.

Try to print again.

If problem continues, disconnect your printer USB cable from your computer. For Windows OS, go to Control Panel > Printers and Faxes. Delete the Lexmark print object. Reboot pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect the USB cable into your computer. Wait until your computer fully recognizes the USB connection before sending a new print job.

If that doesn't help, please contact Lexmark Technical Support Center for additional assistance.

That is a pretty old machine. Not sure whether it has enough resources to browse web. I don't think that machine has either usb or modem port. If so you need to buy a router which has a serial connectivity. I m not sure whether they are available. You can use a serial to usb converter to access it. There are some techniques to overclock the CPU as well. You can check it by surfing the net.
Please rate the answer and a testimonial (comment) if the solution helped you to solve the problem...Thanks for contacting Fixya

WHen you say blue tooth do you mean you want to hook it up to your home wireless network? if so you can buy a USB blue tooth adaptor to run on your computer. IF it does not have a USB slot you willl have to buy a rs232 port with usb adaptor or blue tooth adaptor. There is a difference between a blue tooth that you hook up at your home and a blue tooth that you can connect anywhere on line, for instance verizon wireless has a large area to use a blue tooth connection to the net but it costs you money. With the verizon plan you can use te net anywhere you can get a signal just like a cell phone. the blue tooth will allow you to connect to unlocked services for instances many hotels and cafes have wireless acess for free all you do is connect it up. If you need more help let me know and I will be glad to tell you where you can buy it and how much it costs.

After you hook your phone up it it will search for new hardware automatically.

Should it not find it, it will give u the option to search for the drivers two ways from your computer.

One, through device manager and two through ad/remove programs.

The third way is to search off the net at the LG download page at their web site.

You need to install your printer first.

If you already have installed your printer, do this:

disconnect printer from computer
cancel documents in queue
if using a straight USB connection, delete all instances of printer. else remove duplicate printer icons.
reboot & reconnect printer (swap cables if not detected)

If you don't have installed your printer do this:

Get your printer software from: www.canon.com

USB printers (Windows 98, Me, 2000, and XP only)

1. Make sure that the USB cable is unplugged from your computer and your printer. USB devices work differently from older devices and usually need to have the drivers installed before you connect the device.
   
   
2. If you have an installation disk, insert it into the drive. If there is an installer provided, it should run or be executed here. Follow its instructions, and it should take care of installing your printer in a few moments.
   
   
3. If you don't have an installation program, plug the USB cable into your computer and your printer. This should trigger the Add New Hardware Wizard.
   
   
4. Click Next, and then select Search for the best driver for your device. Click Next.
   
   
5. Uncheck all options except Specify a Location. Click Browse. Browse to the disk, CD, or directory where your printer drivers are located. Click OK, and then click Next twice. Note: You can download some drivers from the web. Consult the web site of your printer's manufacturer, or see Where can I find driver updates for my Windows computer?
   
6. When all the files are copied, click Finish.
   
   
7. Turn on your printer. Windows should detect the printer's presence and finish the installation. If the option to print a test page is offered, do so. This will confirm the installation. Click Finish.

yes you can all you need to do is hook up your usb modem to a computer or laptop and hook a ethernet cord to your computer to ur 360 note- hooking a usb modem in a 360 will not work. ive had mine hooked up 24/7 to halo3 it works wonderful may glitch once in a blue moon but its better than hughes net never ever ever ever get hughes net get verison!!!!

hi download LG KG195 PCSUIT and use your mobile to connect to internet ,etc

CLICK HERE TO DOWNLOAD
http://in.lgmobile.com/web/web.support.manualRF.laf

download the USB driver
modem driver
PC sync pc suite

Call Net Gear Tech Support.

turn off computer..hook up usb..turn on computer...see if that helps..try another usb port..