Problems with registering

Hi Shirley, Ring your service provider and they'll give you the FREE PUK code.........CHEERS..

Register Your Product - Samsung

www.samsung.com/us/support/register/product

Samsung ElectronicsTo register your product, you will create a Samsung Account. ... AVAILABLE FORREGISTRATION OF PHONES, TABLETS OR REFURBISHED PRODUCTS.

Product Warranty Registration - Huawei Official Store

www.gethuawei.com/product-registration

Register your Huawei product and receive additional premium customer ... We understand how valuable your time is and problems with your phone can be ...

Warranty & Registration - Trane

Hi, the handset is not registered with base, to register please follow this process:
1. On handset press Menu/OK.
2. Press cursor up or down to choose "Register HS", then press Menu/OK.
3. Press Menu, 0, 6 on the control panel of base unit (MFP)
4. Press OK on the control panel of MFP.
You should hear one long beep when the handset is registered correctly. If not (three short beeps) repeat steps from 2 to 4.

it could be that when you registered you registered with a mistyped character.
contact MagicJack via the chat. or by phone to correct.
Here is the knowlege base site.
http://www.magicjack.com/5/faq/

never heard of anyone giving away free register keys. Best to ring a dealer and ask them for one. They are usually pretty cheap

ring your network provider (who your sim is registered to)

tell them you managed to block you phone

they will provide you a puk code

call your carrier

This manual should help you
http://www.uniden.com/pdf/EZAi2997om.pdf

regards

Similar issue - brand new phone - but incoming calls (skype or landline) would ring - and then nothing, and outgoing calls the handset would just reset.

The handset would just lose signal constantly (less than 2 meters from the base station).

The phone shipped with the latest software - but eventually I reinstalled it - no change, then de-registered the handset, powered everything down and re-registered the handset and that *seems* to have done it .....

So
1 - reflash / re-install latest software from philips website (even if the phone already has the same version)
2 - de-register handset (follow instructions)
3 - unplug base station and remove batteries from handset
4 - turn on base station, put batteries in handset
5 - re register handset (follow instructions in manual)

and that seems to do it.

Had the same trouble reset the phone to defaults and do not register handset. Enter the area code and program the ringer volume. Use the PROG (MUTE PROG) key & the CALLERID-VOLUME buttons to make selections in the menu on the screen. to save the setting press the PROG key.