For the last 4 weeks i have been unable to print .it happened all of a sudden and im presuming i have lost a file or something. i have mislaid the original cd so have reinstalled the printer but when i get to the part where you plug in the usb cable it doesnt recognize the cable so i am unable to finish off installation and therefore cant print. any advise? i have a mesg that comes up about destinations msi being not found...

Did you check restarting your device? It happened with me also but the restart worked fine. If this does not work then try to put other sim card and check. If it happens again try resetting your device.

I presume you mean Lexmark E120 Printer

You can download the complete manual from the below link

http://bit.ly/j2bM4Y


Hope this helps.

Bad connection between PCM and battery/ignition switch.

could be you lost a file, turn off your anti-virus and reload the cd see if it will copy over the missing file. I have a feeling you lost a dynamic link for the program, i would remove it and reinstall the software if it were me

OK, well when printing from the internet it quite often only prints the screen you are on, I presume, because you likes what you read, you wish to print it, well as you are on Page 3 the end of the document, thats what get printed. You actually, need to go to the File Menu, select, Print, and actually select, the type of print, there are options, Print ALL, Print Page, Print Selection, you need to set that, it sometimes remembers a setting and perhaps 3 was the last setting.. In any event don't just "Hit Print" you have to do as related, I am not sure if you can set up special "Print Now" parameters, but I expect you can, choose a "Default" setting.

It's this Damn washer!! It's happen to me 3x. LG controls all their parts.. They cost sooo much and I replaced this board for the 3rd time!! Last one only lasted 4 months and I use it like once every 2 weeks. Curse LG!!

Check the flux capacitor, those usually go out on brother faxes.
I just replaced mine last week, same problem.

SOUNDS LIKE U HAVE LOST THE GREEN OR BLUE COLOR GUN

my printer not work what im doo

if you replace the black ink cart with an original one then it's the print head
Solution: Cleaning the Print Head - C555 / C560 / C635 / C530 / C545

Untitled Document Follow this procedure to clean the BJ cartridge print head:
1. Press 2. Press 3. Use or to select the [HEAD CLEANING]..
4. Press .
The MultiPASS cleans the print head.