Troy-Bilt Pony Garden Tiller Logo

Related Topics:

Posted on Mar 09, 2017

Troybilt transmission leak rear tines

I havew an old troy bilt tuffey tiller i think 1987 vintage with a serial number stamped on the transmission of x0008653 with a tecumseh engine h30 35387s serial no 80900
it has sat for a while most serious problem is the transmission oil leaks from the rear tiller tine shaft
i tried to take it apart got the tines off one side the leaking side there is a rubber seal with a e ring under it that i assume if i could get the e ring off i could get a new seal and stop the leak
any ideas on removing e clip got one of those tools to release it but it is recesed under rubbeer
and while not come off it seems to bind in the hole on the seal housing (was able to pry rubber out
the other problem is that the wire that the handle pulls is ceased
and i need a few parts how do i find a parts list for this model
mike frangiosa
email
[email protected]

5 Related Answers

Anonymous

  • 45 Answers
  • Posted on Apr 29, 2009

SOURCE: troy bilt pony left side tine assembly fell off

sounds like the shaft is either bent,or the inside diameter is worn and the shaft tube needs to be replaced.

Ad

Anonymous

  • 69 Answers
  • Posted on May 06, 2009

SOURCE: does rear tine tiller run 2 belts

Check the Troybuilt website for specific info on your tiller.
www.troybuilt.com

Anonymous

  • 22 Answers
  • Posted on Oct 10, 2009

SOURCE: I have a Troy Bilt Tuffy Tiller H30-35387S Ser

You've got the right serial number - it appears you've got one of the older Tuffy's. I'd suggest keeping an eye on Ebay for the manual you're looking for. I find them out there with some regularity. You can't get them from a dealer anymore because this Tuffy was sold by Troy Bilt before they went bankrupt and MTD bought the assets.

Anonymous

  • 279 Answers
  • Posted on Nov 14, 2009

SOURCE: drive shaft is stuck and will not drive tines, Troy Bilt Tiller

If it is the shaft and not the belt, you will probably have to take the tynes off the axle and clean and lube them. It may also be the differential, I would check that first. Good luck...Lee

Anonymous

  • 2 Answers
  • Posted on Mar 29, 2010

SOURCE: Where is the model number on my troybilt rear tine tiller?

If it's as old as mine (circa 1976), it's stamped on the casting right below the T-handle that allows the handle bars to pivot (also the gear case fill cap)

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the model number located on my Troy Bilt Cultivator Plus roto tiller

Locating Your Model NumberThe Model number is eleven characters long and is printed on the left side of the Product Identification Label. Characters can include numbers, letters or hyphens.

How to find your model number - Troy-Bilt

Troy-Bilt https://www.troybilt.ca > how-to-find-model-number

Model & Serial Number Tag Location - Troy-Bilt Products


Troy-Bilt https://support.troybilt.com > article
RECENT PRODUCTION tiller models, machines manufactured since 2001, will have a model and serial number sticker normally located on the tine hood of the machine.

Missing: Plus ‎' Show results with: Plus

Locating Your Model Number

MTD Parts https://www.mtdparts.com > how-to-find-model-number
The product's model number is essential to finding correct MTD® genuine factory replacement part numbers for your Yard Machines, Troy-Bilt, Bolens, ...
Sep 29, 2023 • Troy Garden
0helpful
1answer

Troy bilt horse tiller tines turn, right wheel turns, but left wheel doesn't turn

0helpful
1answer

I WAS JUST GIVEN A TROY BILT 5 HP REAR TINE PONY ROTA TILLER. THE DECAL WITH THE MODEL NUMBER ETC. ON THE TINE CASING IS UNREADABLE. DO YOU HAVE ANY IDEA WHAT MODEL THIS MIGHT BE? I WOULD LIKE TO GET A...

The serial # of the tiller should be stamped directly above the right wheel on the transmission housing. This should give you more info to work from.
0helpful
1answer

I have an old troy bilt pony rotertiller no serial tag

The decals r a good indication, they probably didn't have any more made than they needed. The only thing i can think of is, sometimes on the back side of the flywheel, (if u ever have it off) r some stamped numbers. One set of numbers is the month, and one set is the year it was made. Now that's the flywheel, but the engine should be the same year.

ballping
0helpful
1answer

Need a manual th1003 serial number 83233 troybilt horse

Ebay has manuals that they say are for all troy bilt tillers on cd for $6.99 free shipping.
0helpful
1answer

Where is the model number on my troybilt rear tine tiller?

If it's as old as mine (circa 1976), it's stamped on the casting right below the T-handle that allows the handle bars to pivot (also the gear case fill cap)
7helpful
1answer

What year Troy Built Horse Tiller

The serial number is stamped on the upper right hand side of the gear housing. It is on a flat spot just above the wheel shaft. If it is a newer model it will be on a white sticker on top of the gear housing plate. If it has the T handle it is probably an older 1980's model. If you find the six digit number I can give you the year it was made.

Frank
6helpful
3answers

How do i adjust belt on troy bilt horse tiller

How do I tighten a belt on a troybilt Tecumseh rear tine tiller?
0helpful
3answers

Oil seal for rear tine shaft

The serial number is located on a flat spot just above the right wheel shaft where the gear housing and the top gear cover meet. It will be a six digit number stamped in the metal.

Frank
Not finding what you are looking for?

309 views

Ask a Question

Usually answered in minutes!

Top Troy-Bilt Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Cindy Wells

Level 3 Expert

6688 Answers

kwfordguy

Level 1 Expert

59 Answers

Are you a Troy-Bilt Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...