Lost the remote code for lc-32gd8e for sky

Firstly, try changing the batteries. If you've already changed then the remote has probably lost the TV code.

If you can post your exact Alba Model number, I will post the correct code and programming instructions for you.

It would also be useful if you can post you Sky remote version number - it's on a sticker in the battery compartment. I need to know if it's Rev 8, Rev 6, Rev 4 or just RC1600/00.

Hi there. I hope you will see this reply. I bought one of these TV's yesterday and I've got the code from my dad's website www.satcure.net

If your remote is Version 6 then you will be able to follow the help on the sky box under
Interactive
Customer service
Program Remote

Then follow the steps using code 1221

If you have a Revolution 8 remote then you will have an easier job but with a 3 digit code.

3 digit code is 253

TO PROGRAM THE remote USING THE 3 DIGIT CODE:
1. Turn on the TV receiver
2. Press TV on the Sky Remote Control
3. Hold down SELECT and the RED buttons together for approximately two seconds, until the RED LED on the Sky remote blinks twice.
4. Enter three digit code from list for the receiver (early versions now flash twice).
5. Press select to enter code structure (the LED will flash twice if a valid code has been entered).
6. Now press the STDBY button and test other functions.

Hope this helps/works!

Tries to clean the remote with a little rag with some WD40 & change ur batteries.Ur tv sit in a place with alot of dust and heat?Take a
backcover apart clean it air hose or strong fan
with a brush.These solutions is cheap can help.Prob. still there later,some parts it have cold soldiers or about to dies

Yes, very often after removing the batteries to replace them in a sky handset, you do need to re-code the hand set to your type of TV. Refer to your user guide for the code number for your type & model of TV.

Press tv on the Sky remote

press and hold select and red until the led blinks twice
type in 0 0 6 0
press the power button, if the tv turns off then the press select and the remote should work all the tv functions.

If the tv does not turn off then press tv then the power button and keep doing this until the tv turns off, once it turns off press select and it should work.

If you have any problems let me know

Dazz

The Sky Remote Code 1280 worked for my Sky+ box

Dannyboi1940

1 am looking for the sky remote code for a wharfedale ltf42k1cb teley

I have used 1221 for my LC-32X20E and all functions of remote control works fine

does anyone know the codes for a mirai tv for a universal remote

Original link no longer working. Found this: http://files.remotecentral.com/download/220/urc08-manual.zip.html
Comment if it's wrong one.