Need rca crk17sa users guide for codes for Magnavox TV

Ok it took me a while. Go to this link to find the codes for you remote: 10054 is the most used code for Magnavox. I hope this helps you out. Good Luck!!!!!!!
http://www.directv.com/DTVAPP/content/remote_codes

Here's how to program your DIRECTV remote control:

1. Press MENU on remote.
2. Select "Parental, Favs and Setup"
3. Select "System Setup"
4. Select "Remote"
5. Select "Program Remote"

1. Look up the control codes for your DIRECTV remote control.
2. Make sure your TV is turned on.
3. Slide the mode switch at top of remote to "TV".
4. Press and hold the MUTE button. This is located above the number 1 button.
5. While still holding down MUTE, press and hold the SELECT button until the green light at the top of the remote flashes twice.
6. Enter the first TV code you have. The green light on remote should flash twice.
7. Aim remote at TV and press PWR button once. The TV should power off.
8. Once the TV is able to power off/on and control the volume, slide the mode switch at the top of the remote back to the left (DIRECTV). Your remote is now programmed.

1. Make sure your TV is turned on.
2. Slide the mode switch at top of remote to "TV".
3. Press and hold the MUTE button. This is located above the number 1 button.
4. While still holding down MUTE, press and hold the SELECT button until green light at the top of the remote flashes twice.
5. Then enter 991, the green light on remote should flash twice.
6. Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP button repeatedly until the TV powers off.
7. When the TV powers off, press and release the SELECT button.