You will have to order one from your local Bernina dealer.
This is a very basic serger and until you find a manual, this may help:
Raise the antenna to it's highest position.
Open the tensions to 0.
Lift the presser foot.
Disengage the knife.
Turn the handwheel so the loopers are at their highest point - there may be a mark on the side of the serger to align with a mark on the handwheel for this.
Start threading from the right to the left.
A threading guide in on the inside of serger door.
Nancy's Zieman's Book "Serge with Confidence" can provide as much information as the mfg's manual.
209 views
Usually answered in minutes!
×