Question about Hitachi 53UDX10B 53" Rear Projection Television

2 Answers

Image of picture has blue color overlaping the other colors

Posted by irisemasanz on

Ad

2 Answers

TEXAS TV PARTS

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

You need to replace the stk convergence chips,stk392-110,and some resistor and the convergence section,that's a normal problem with projection tvs,thanks,faradio.

Posted on Mar 07, 2010

Ad

Edward

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 3,459 Answers

These sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

  • Screen Looks Distorted/3D
  • Colors wont align
  • Screen may look distorted
  • No Audio/Video - makes a chirping sound.
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking screen
  • White looking sceen
  • Halos around objects
  • Red/Orange looking

You can see some examples and find a fix here...

image of picture has blue color overlaping the - bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Posted on Mar 07, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is convergence IC problem


Convergence has to do with how different colors are displayed on a screen or monitor - typically the rear projection and some other types. When colors are overlapping to create unexpected combinations, or leave gaps between areas where overlapping is expected that results in a shifted red, green or blue image strip or edge - that is an indication of a convergence issue. They can look like this in severe cases:

c31c1afa-63aa-42ee-9cc7-7b07e09559be.jpg


Colors will drift, so manufacturers often include a utility to help you nudge the colors back in the right place. Most times this utility is buried in the Set Up Menu and when activated, produces a screen like this:

6c0170ed-2cd6-4dfa-bbcb-a10a7d20f92f.jpg


You will need to adjust the red, green and blue colors for each cross so that only a white cross is displayed. Keep red, green and blue fringing to a minimum. When you're done, the screen should look black and white, symmetrical and straight - like this:

40e4c7a6-f241-4888-a151-d21b0792cb71.gif

Problems arise when you are no longer able to coax the utility to give you these crisp, B&W results with no red, blue or green ghosting. This is often due to a failing convergence integrated circuit ("Convergence IC"). Many times, replacing it will solve the problem, but other times it can be the result of failing components either ahead or after this IC. If you're attempting to replace this IC, please make sure the TV or monitor has been *unplugged* for 24 hours or more to allow the dangerously high voltages to dissipate.

Sep 08, 2014 | Hitachi 50VS810 50" Rear Projection HDTV

1 Answer

Ghost / Overlapping Image


ok you have defective convergence crrection circuit! or maybe the RF Box is defective! can you describe the color of the ghost?

 

Oct 12, 2007 | Samsung HCN4226W 42" Rear Projection...

1 Answer

I have a toshiba tp50h50 rear projection tv and their is a blue shadow behind the words and makes the words a little blurry


Sounds like you need to do a color convergence. If you still have the owner's manual, it will give great detail on how to do this. The convergence menu is accessed from the video menu on the tv.
The tv has three color picture tubes, red, blue and green. The convergence alignment adjust each tube so that color from each tube overlaps each over to create a white image on the screen. Most tv's only allow you to adjust the blue and red colors.
Convergence should be performed each time the tv is moved and at least once annually.

May 16, 2011 | Televison & Video

1 Answer

Picture


This tv have convergence problems,it dead.Red,green,blue misaligns colors,have colors shadows,3d colors pic like.All these problems are the convergence board have 2 STK convergence ICS some or all it resistors are dead.These parts must change to solved convergence problems.The shop will cost u $300-350 for parts and labors.

Jun 07, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

Colors are out of focus and magic focus wont fix


If you have tried the customer convergence menu/control and can not set the convergence you have a fault with the electronic circuit that controls the convergence of your 3 picture tubes this overlaps the 3 colors red, green, blue to create the proper color combination's of colors for a proper picture

May 05, 2010 | Hitachi 57F500 57" Rear Projection...

2 Answers

Colors arched and overlapping


if the option for convergence is still listed under the setting section of the on screen menu, then you need a convergence power supply board. If the convergence option is missing from the menu you need the ITC222 convergence missing repair kit. You can get either one at the following link they include instructions for the repair.
http://www.tvrepairworld.com/

Jul 13, 2009 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Color distortion


Hi, could use a little more info, if your seeing red, blue, or green colors overlapping the image then your convergence IC`s have failed, if thats not what it`s doing please reply with more info about the symptom, video-tek

Feb 08, 2009 | Hitachi 43FDX20B 43" Rear Projection...

1 Answer

Text/images overlap each other in 3 colors, 3D distorted picture


Here are some of the most common symptoms and example photos of a convergence problem

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
701cb04.jpg
77ea520.jpg
f0900cb.jpg

Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence section.

Try to adjust the red and then the blue convergence.



You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.


2c07611.pngSolution


You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kits for most models. If you don't see a kit for your set send them a quick email and they will put one together for you. Their kits includes photo instruction guides, original Sanyo STK chips, convergence resistors, pico fuses, etc.

Jan 28, 2009 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Have picture but color overlaps and is not sharp or crisp.


depending onwhat board you replace you may have to copy the light engine data to the chassis to sync the color wheel.

Dec 10, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Distorted color on image


You might have "color filter" settings. Turn the digital filters off. Here is what manual at p72 says. "You can take pictures using digital filters. The filters consist of color filters such as red, blue and green, a soft filter that produces a fuzzy effect. Color filters Eight colors, black-and-white, sepia, red, pink, violet, blue, green and yellow, are provided for the color filters. When you select a color filter in the Digital Filter mode, the display on the LCD monitor is filtered with the selected color, and the pictures are taken in that color."

Mar 20, 2007 | Pentax Optio 555 Digital Camera

Not finding what you are looking for?
Hitachi 53UDX10B 53" Rear Projection Television Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Todd Hill
Todd Hill

Level 2 Expert

433 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...