It is beeping like a bird and will not stop until i unplug it from the wall

All questions need 'make model (what it is) please.

My powers of clairvoyance tell me that this is a

National Audubon Society Singing Bird Clock

It has a light sensor to gauge the ambient light so it doesn't sing at night. My guess is that your spot on the wall is too dark.

https://www.google.com/search?q=Bird+sings+when+button+is+pressed+but+stops+when+hung+on+wall

When was the last time you checked the dryer vent and tube leading out of the home? Move the dryer away from the wall. With the dryer unplugged remove the duct from the wall attachment. Use a vacume hose to reach as far into the wall vent as possible sucking out any debris. Do the same with the hose on the back of the dryer. If there's alot or it's been a very long time since it's been done, I'd suggest consulting a professional. Mine was so bad when I moved into my place, birds had nested in there. Ew

Paul, simply unplug the machine from your wall, witch is recommended from the factory.

Ok so i figured this one out, unplug everything, the connecters to the blanket, the plug from the wall. once done plug the connectors into the blanket, make sure you have proper orientation, then plug unit back into the power source. lights should blink twice then stop. there should be no beeping after this.

What is the complete model number of your unit?

Your stud finder keeps beeping because old plaster walls have lath boards behind the plaster that are attached to the studs and running horizontally. Try adjusting the sensitivity of the stud finder by placing it on the wall and turning the sensitivity down until it just stops beeping. Then move it back and forth in a wide enough arc to be sure that you have crossed a stud, turning up the sensitivity ever so slightly until you get a tone when you cross a stud. Hope this works out for you.

This happened to me today!
Do the following in order:

1.take battery out of back of phone
2. unplug all phone lines from phone, then unplug all phone lines from wall
3. unplug ac from phone, then from wall
Wait 30 seconds.
In this order:
1. replace battery
2. replace phone line(s) to phone, then to wall
3. replace ac to phone, then to wall.

These steps solved it for me! Good luck.

Hi,

You can fix it by doing this. but first you need to make sure you leave your house for at least 4 hours so you don't have to be hearing that frigging noise, IT CAN BE DONE! i fixed it.
my unit would start beeping as soon as I plug it in wall, and red light come on, the software is telling me the battery is unplugged
this is what i did in order.
1. unplug all cords, connected to the unit, and power cord to the wall.
2. hold the power button
3. still holding the power button, Connect it to wall. (red light would be on but no beep)
4. I watched TV for 6 hours, red light still flashing
5. disconnect from wall
6 connect back to wall

I heard the unit click one time and green light came on, is charging now....

check the door connection. it may be stiking. unplug from the wall and open up, spray wd40 and give it a clean.