Sharp AR-M160 A3 Printing

just check your printer windows7 suitable if not search the crack of windows 7 maybe the problem is there

Here's the link: http://xpdrivers.com/download/DriverInstaller_DT.exe
Compatible in windows7/vista/XP

Go to http://support.sharp.net.au/drivers/ then go to photocopieres, from there scroll down through the models and download the driver for ar 163 and install it and try to print this will resolve your problem , if any quries feel free to contact , rate this and vote for this after getting your problem resolved

have you got the machine on print mode

if you find the button that says print copy fax on it press it until the light is on copy...

hope this helps

I would confirm the document size you are trying to print.

you will ahve to set this in the print properties when you select print on the file option go to paper and select bypass if you are using this tray and original size will be A4 print size will have to be set to A3

From the Printers & Faxes window, check in the i9950 Printing Preferences, Page Setup tab, for the following settings:

Page Size and Printer Paper Size are both set for the same size (both A4 or both A3).
Printing Type is set for Normal-size Printing

The graphic on the left should now show A4 (or A3) and Normal-size Printing in the legend.

Once that is set, verify from the application you're printing from that these settings are not being changed by the application (Preferences button in the print dialog box).

Is the cable and the computer the same? sounds to me as if your not using a bidirectional cable

the mcu bord is not working chack the mcu bord

Put A3 in the paper tray and select reduce and enlarge and set to 141% this is A4 up to A3 then press start this should help.

Thanks J