Once you set the tax rate & the exchange rate, how do you use it?

Firstly, you need to set the tax rate. If you have multiple taxes in your country, set tax number one, two, three etc. Once the rate is set, link each department or PLU to the taxes as they apply. good luck.If you need a manual to get the tax setting codes, C-tech has most of them here:http://the-checkout-tech.com/

The c1, c2, & c3 are for exchange rates. To set the c2 exchange rate press AC. Press the MODE M/EX button till EXCH appears in the display. Press and hold the SET/% button for a few seconds until SET EXCH appears in the screen. Press c2, C2 SET EXCH RATE should be displayed. Enter the desired echange rate. For instance, today, Thai Baht is 32.8677. Once you enter your desired exchange rate, press the SET/% button.

To convert 100 dollars using the exchange rate you set on c2, make sure that EXCH is in the display by toggling the MODE M/EX button. Press AC, enter 100, press c1 then c2. Using 32.8677 as the exchange rate 100 dollars would be 3286.77 THB.

To convert 100 THB to dollars you would enter 100, then press c2 and then c1 yeilding 3.04 dollars.

You can also program a different exchange rate into the C3 button. To convert to that currency, you press c1 then c3. To convert from that currency, you press c3 then c1.

Hope that helps

press AC
press RATE SET, hold for approx5 secs till you see "tax" "%" displayed
type in new rate (say 20)
press RATE SET (to confirm 20% as new tax rate)

Done

Press and hold SET until screen has SET EXCH along the top. Press TAX+ (this will show existing tax rate) enter new tax rate then press SET once more. Tax rate is now set. Hope this helps!!!!

From your member discuss area, who know how to change the Tax Rate.

It is almost the same way to enter/change the currance exchange rate.

How do I program tax rate into my calculator?


Non-printing models (also applies to HR-8TE printing calculator):

1. Press [AC]
2. Hold [SET/%] key for about 2 seconds
3. Press [TAX+]
4. Input the tax rate
5. Press [SET/%]

Hold "set" key until "set exch" appears. Then hit "tax+" key and enter
in correct amount. After amount set then hit "set" key once again to complete set up.

Try that, seems to work on a few Casio models

To change the tax rate, first press AC. Then press SET % for 2 seconds. Next, press TAX+, then enter the new or current tax rate. Enter the rate for a single digit tax rate such as 5% as 5, a single number; if you have a fractional percentage rate, such as 5.75%, enter it just that way: the 5, then a decimal and followed by 7& 5. Then press SET % again and you're done! I just did it on two of the calculators and it works. Hope this helps!

i have a CASIO MS-80TV calculator how do i set the peso & tax rate?

1. Switch off the calculator
2. Switch it on again
3. Press and hold the tax button (set %) until the display changes
4. Enter the new tax rate
5. Press the tax button (tax +)

Any problems contact [email protected] - he emailed the solution to me and it has worked.

Pam