Question about ViewSonic E70f 17" CRT Monitor
Option 1: OSD lock - all 4 buttons are locked except the "POWER"
button. Press and hold the "MENU" and ">" buttons for 3
seconds to lock the buttons. Repeat this step to unlock.
Option 2: OSD & Power button lock - all 5 buttons including the
"POWER" button are locked. Press and hold the "MENU"
and "<" buttons for 3 seconds to lock all 5 buttons. Repeat
this step to unlock.
Posted on Mar 06, 2010
The OSD can be enabled or disabled by pressing and holding the Menu button on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lock displays for ten seconds.
* If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD.
* If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.
Posted on Mar 06, 2010
Thanks man, omg it was soo annoying to no be able to disable auto source, I would of read the manual if I still had it xD
Posted on Aug 26, 2012
Tips for a great answer:
May 30, 2012 | LG Computers & Internet
Aug 12, 2011 | Computers & Internet
· The OSD Lock Out Message
Power your computer completely off and then remove the monitor cable from the port on the back side of the computer case. Reattach the cable and make sure the pins are correctly screwed in all of the way. Power the computer back on and check to see if the OSD lock out message is still being displayed.
Check the manual that came with your computer or monitor and locate the troubleshooting section if you are still receiving the OSD lock out message. Find the OSD lock out heading and read the method that your particular model of monitor uses to remove the lock out. Follow the instructions to remove the lock out.
Attempt generic lock out removal procedures if you no longer have the manual that came with your monitor. Press and hold the "Menu" button located at the bottom end of your monitor for 15 seconds and wait to see if the OSD lock out message disappears.
Press the "Menu" button again if the lock out message remains on the screen. Use the arrow buttons to navigate through the main menu options. Highlight the "Settings" or "OSD Menu" option and then hit the Menu key again to access the new list of settings.
The OSD Settings Menu
Scroll down to the "OSD Lock" heading. Use the arrow keys to change the setting to "No." Hit the Menu key again to return to the main menu. Scroll over to the "Exit" setting and then hit the Menu key a final time to exit the menu setting and remove the OSD lock out
Jul 22, 2011 | ViewSonic E70f 17" CRT Monitor
Nov 26, 2010 | ViewSonic E70f 17" CRT Monitor
Nov 22, 2010 | HP L1506 15" LCD Monitor
Feb 04, 2010 | ViewSonic E70f (White) 17 in.CRT...
Aug 07, 2009 | Philips 170S7FS 17" LCD Monitor
Apr 06, 2009 | Samsung SyncMaster 713BM 17" LCD Monitor
Jun 10, 2008 | HP Compaq FP 7317 17" Flat Panel LCD...
9,181 people viewed this question
Usually answered in minutes!