Canon printer error ##335

re filled inks have being installed that's why u get u163 or u162 error
try following to resolve yours error u163 or u162

1. Turn off your printer and turn it on again.
2. After the printer initializes, try to copy or print something. The error will appear again.
3. When the error is displayed on the display panel of the printer, press and hold the STOP/RESET button and wait until it self restarts.
4. Release the STOP/RESET button while the printer is restarting.
5. Wait for a few seconds and the pending print jobs will commence.

Hi!
here is your solution.
Press Stop/Reset button for 5 seconds without release to press.... after 5 seconds your printer will start its process.... thanks

1. plug off power cable
2. press and hold stop/reset button
3. plug on power cable
4. press and hold power button(still hold stop/reset buttn)
5. still hod power button, loose stop/reset button
6. press stop/reset 2X then loose power button, wait until 0 displayed
7. press stop/reset 1X
8. press power button 1X, printer will print 1 time
9. press stop/reset 2X
10. press power button 1X,printer will print 1 time
11. press stop/reset button 3X
12. press power button 1X ( no print proses)
13. press stop/reset 4X
14. press power button longer than before for turn off printer, if print not turn off plug off power cable
15. turn on printer and error 27 will disappear

i hope this helpfull
thanks for using fixya

http://www.printcopy.info/?l=en&mod=docs&brand=Canon&prefix=imageCLASS&gID=7369

It costs $12 to get the service manual for the printer.

Please try this solution first, it might resolve your faxing transaction by resolving first the u163 error.

What happened when ink ran out from a refilled cartridge and the printer detected it?
The printer will display an error U162 or U163. All functions of the all-in-one printer will stop and your printer will not work. The next thing you will know is you are in the front of a computer shop and buy a genuine canon cartridge.
But wait, there is still a way to fix this. Reset it again using a different procedure. Reset the detections of reusable cartridge.
1. Turn off your printer an turn it on again
2. After the printer initialize try to copy or print. The error will appear.
3. When the error is displayed on the display panel of the printer, Press and Hold the STOP/RESET button and wait until it self restart.
4. Release the STOP/RESET button the the printer is restarting.
5. Wait for a few seconds and the pending print jobs will commence.

Please rate this answer.
Thanks for using Fixya.

Your error ##335 says either the purge unit is stuck or the sheet feed assembly is broken, when you need parts to repair a printer it isn't free, when you need a simple reset or programming there's no cost.

Go to the Canon Web site http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=232&modelid=8047 (may have to copy and paste into browser. I believe it is either a Print head (7 flashes) which will require repair/replacement of print head - or - a waste ink error that requires a reset. There are other posts on this site that explain how to get the printer into service mode to reset.

how can i reset canon pixma mp 110 tahnk you please help me

HI Guys 6A00 error usually cant't be fixed according to the service centre, I was lucky and actually bought an extended warranty, the service centre said that the MP530 are a good printer and worth fixing as they don't see many at all compared to other models and other brands. There was a broken piece of hardware that something to do with the print carriage. cheers vailey