Question about eMachines W3507 PC Desktop

1 Answer

My niece just called and her emachines w3507 doesn't boot,the light on the front lights and a fan comes on a little louder than normal but nothing else happens,no harddrive light or noise ,screen says no signal...she just hooked up to the net earlier this week.She turned off the pc last nite.then today when she tried to boot ,not working.

Posted by Anonymous on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 93 Answers

Start ur computer press F8 rapidly if popup menu came then goto safe mode,if not then u have a problem in ur ram.but u say its giving no signal thats mean vga resolution may be not compatable with ur monitor.go to safe mode and remove ur vga driver and restart ur pc if u have a vga problem.
still u facing a problem then better chage ur ram

Posted on Mar 06, 2010

Testimonial: "thanks for your help.I removed ram and reseated the stick and it ran as good as normal thanks."

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

3 beeps no boot


3 bleeps usually relating to memory... try removing and re-inserting RAM and video cards... or try them elsewhere in another machine. It may be wise to remove all the RAMs and add one at a time while trying to reboot.

NOTE: Remove the power wait a few moments before handling each RAM.

Another cause since it's been 'sitting' a while could well be the power supply due to failing capacitors, so trying another wouldn't be a bad idea.

Jul 03, 2012 | eMachines W3507 PC Desktop

1 Answer

I have the Emachines W3115, Problem #1 It has been a good computer, about a year or so ago,when I go to restart the computer it goes into the restart mode, restarts but does not come back, it does not...


sounds like a bad power supply... get one from newegg.com they are easy to replace, it will only plug in to the place it is supposed to.... check wattage out put and get same or higher

Feb 12, 2011 | eMachines W3115 PC Desktop

1 Answer

I have an eMachines T2200 The power supply started making noise and I shut the system off. The next time I tried to boot up nothing happens. I replaced the power suppy and when I turn it on the cd and dvd...


I would check to see if power is getting to your hard drive, Make sure the white molex's are plugged in.

E-Machines are, unfortunately the worst machines out there. They're up there with Compaq.
You're not going to like what I say but I'd urge you to buy a new one. Chances are it will take an arm and a
leg to fix what your using and for a little bit more money you can have a really nice one for 500 dollars
or less.

Dec 31, 2010 | E-Machines eMachines Desktop PC

1 Answer

Emachine w3507 blue light only comes on fan runs nonstop, no signal or monitor, pressing the f8 did nothing


If you get nothing but a blue light and no video at all it sounds like you have a bad power supply. They are easy enough to check and replace but not for a first timer. If you know someone who knows more; get a volt meter and put it on the DC scale. Unplug a power plug to a drive or find one that is not used. Measure the Yellow to black and then the red to black wires. You should get 12 & 5 volts respectively.

Apr 18, 2010 | eMachines W3507 PC Desktop

1 Answer

I have a 3507 emanchines computer.When I push start button all it does is show green light clicking . Then it will stop and the white light will below will blink 7-8 times. The green light will click about...


sounds like an issue with your motherboard or something like that...try resetting the motherboard by unplugging the power, taking out the battery of the motherboard inside the computer and pressing the power button several times to drain the power. then put the battery back in, plug in the power cord and try to start it up. if it doesnt work then ur gonna have to contact emachines because ur mobo is either defective or broken...

Nov 12, 2009 | eMachines W3507 PC Desktop

1 Answer

Yellow Light


Emachines are bad for having failed power supplies and motherboards. Test your power supply, watch this video.
http://www.metacafe.com/watch/729606/how_to_test_your_computers_power_supply_psu/

Aug 03, 2009 | E-Machines eMachines Desktop PC

2 Answers

Emachine doesnt turn on


contact me for support on these computers free of charge at [email protected]
Chris

Jul 14, 2008 | E-Machines (308714) Motherboard

1 Answer

Emachine w2686 no display when boot up


Couple things to check. First, check with different monitor. Their monitors are usually build by KDS and I think there was a bad series out there. Also check for any beep codes through speakers on startup, this can tell you bad ram or bad video out. Also try unplugging computer and removing CMOS battery inside (watch like battery). Lastly, If non of the above, a bad processor will allow the computer to come on but no beep, no boot, no nothing but fans and green power light. Hope this helps a little.....

Apr 25, 2008 | E-Machines eMachines W2686 PC Desktop

Not finding what you are looking for?
eMachines W3507  PC Desktop Logo

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...