We have misplaced the User Manual and the machine is prompting us to change drum - we have replaced the toner but can't find where anything else could be changed

Question 1

0helpful

2answers

How do I bypass a "toner empty" message on my fax machine?

http://www.nodevice.com/user_manual/panasonic/phone_and_fax/kx-fl511.html#.U20YSvl5MxA

You should find your information here

Have a nice day

May 09, 2014 • Panasonic KX-FL511 Plain Paper Laser Fax

0helpful

1answer

My all-in-one printer keeps telling me that I need to change the drum soon. I bought a new drum inserted it into the printer and now I can't print anything. Plus, it is still telling me that I need to...

This message would continue to appear if the drum counter was not reset when you replaced the drum. To reset the drum counter, follow the instructions listed below.

Open the front cover.
Press the Options key on the control panel.
The display will show "REPLACE DRUM - 1.YES 2.NO".
Press 1 to reset the drum count.
Close the front cover.

Note

Brother strongly recommends that customers do not use generic drum units and/or toner cartridges, or refill their Brother toner cartridge. Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations. Each individual component is designed to work with the other to ensure quality and reliability. Using non-Brother supplies may affect the hardware performance, print quality and machine reliability. The Brother limited warranty does not apply to any problem that is caused by the use of unauthorized third party drum units, toner cartridges or toner.

If you are using a genuine Brother drum and toner and after following this procedure the unit continues to show "CHANGE DRUM SOON", your machine may require service. Please contact the Customer Service Center.

May 01, 2010 • Brother MFC 7420 All-In-One Laser Printer

0helpful

1answer

Brother MFC 6800 Drum replaced, now prints blank page. Plastic sheet was spit out indicating correct install. Same toner cartridge will work if old drum re-inserted, but print quality is bad, as drum worn...

Here is a link to the user manual check page 187... and buy a new toner... sometimes the toner runs out and the unit does not alert you... if the toner does not fix the issue but the old drum still works... then your new drum is a dudd and needs to be changed...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Dec 16, 2009 • Office Equipment & Supplies

0helpful

2answers

1.5 inch black line on incoming faxes

Sounds like a paper clip (or similar) has fallen into the machine and is next to the drum.
Remove the drum unit and see if anything is in the machine or on the drum unit.
Replace the drum if it is close to the end of its life.

Nov 12, 2009 • Pitney Bowes 9920 Plain Paper Fax

0helpful

1answer

Black stains on ep2010 cs pro i tried to clean the drum now it do

You may can be lucky and just pull out the drum unit and clean the build up of toner that is between the drum unit and developer unit. This will slow down having to replace the drum and developer, but it could fix THIS problem.

Sep 16, 2009 • Minolta EP4000/5000 CS/PRO Copier

0helpful

2answers

Toner for fax machine 2920

If your machine is a Brother Intellifax 2920, it does take a TN-350 toner cartridge. Maybe you were wanting to replace the Drum Unit instead, DR-350. I'll bet this info is useful, yes?

Jul 03, 2009 • Brother FAX-2920 Plain Paper Laser

0helpful

1answer

Displayed error

sol:
1:you have to replace the drum unit.
or
2:open the drum unit & open waste toner cap &remove the waste toner & close the cap&insret the drum unit into m/c .problem solve.

Jan 13, 2009 • Canon imageRUNNER 400S Copier

0helpful

1answer

Hello, I have a Minolta Magicolor 2490 MF, printer/copier. The display shows "low toner". My question is this: Is it possible for the machine to identify the seperate toner levels, so I can replace only...

hi,
if it has a 4 toners which color are separated (the cyan, magenta, yellow and black) then you can replace a low toner one at a time. for example if the black color prompt you that it needs a replacement then you can put off the black toner without changing the other color not until such time it prompt you that it needs replacement. For replacing it I believe it has an instructional manual or if it's still under warranty you can ask assistance from your dealer to help you how.

Dec 20, 2008 • Office Equipment & Supplies

0helpful

1answer

CC and drum Icon will not go out after changing toner cartridge

This Machine needs a copy cartridge. Replacing the toner will not clear it. The copy cartridge is the drum unit which is why the drum light is on. With the new copy cartridge a chip on the cartridge will reset the counter and clear the "CC" and the drum light. If you cant find this I can send you one. I believe on this model it is user replaceable.

Oct 31, 2008 • Office Equipment & Supplies

0helpful

1answer

Poor quality of copies

If it is a real genuine Brother toner. Not a reman. You may also need to change the drum. If you have a user manual, it will show you where the drum life setting is in the menu structure. Make sure the little glass window inside on the right is clean so it can read the toner level. Make sure the toner save feature is turned off.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

Aug 14, 2008 • Brother IntelliFAX 4100 Laser Fax

Question 2

Clive

Master 4,362 Answers
Posted on Mar 05, 2010

Clive

Master

Joined: Jan 23, 2010

Answers

4362

Questions

0

Helped

1813912

Points

14613

Hi there
Gave it 10 minutes just putting the file on wesite for you.

I have put a PDF files on my website for you to download.

Just click on the links it will download for you.
It got all you need to know in this file.
You can read it on site and print it strait off the website or save it to your PC then print it out.

Click LINK= http://www.4all2sell.com/pdf/Brother-DCP-7010L-DCP-7025-MFC-7225N-MFC-7420-MFC-7820N-Manual.pdf

You will need a adobe reader to see this file If you not got an Pdf reader you can download it off this link free.
http://www.adobe.com/products/reader/

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

All files on my website are only there for a limited time.

Testimonial: "Thanks so much for your help and advice - Greatly appreciated."

Clive Mar 09, 2010

All the Best And Take Care All the Best And Take Care

×

Related Topics:

We have misplaced the User Manual and the machine is prompting us to change drum - we have replaced the toner but can't find where anything else could be changed

1 Answer

Clive

Add Your Answer

Attachments: Added items

Related Questions:

How do I bypass a "toner empty" message on my fax machine?

My all-in-one printer keeps telling me that I need to change the drum soon. I bought a new drum inserted it into the printer and now I can't print anything. Plus, it is still telling me that I need to...

Brother MFC 6800 Drum replaced, now prints blank page. Plastic sheet was spit out indicating correct install. Same toner cartridge will work if old drum re-inserted, but print quality is bad, as drum worn...

1.5 inch black line on incoming faxes

Black stains on ep2010 cs pro i tried to clean the drum now it do

Toner for fax machine 2920

Displayed error

Hello, I have a Minolta Magicolor 2490 MF, printer/copier. The display shows "low toner". My question is this: Is it possible for the machine to identify the seperate toner levels, so I can replace only...

CC and drum Icon will not go out after changing toner cartridge

Poor quality of copies

Not finding what you are looking for?

DCP-7025 All-In-One Laser Printer

How do I bypass a "toner empty" message on my fax machine?

Ask a Question

Check Out the Latest Printers Report

Top Brother Office Equipment & Supplies Experts

Norman Weimar

Cindy Wells

k24674

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

We have misplaced the User Manual and the machine is prompting us to change drum - we have replaced the toner but can't find where anything else could be changed

1 Answer

Clive

Add Your Answer

Attachments: Added items

Related Questions:

How do I bypass a "toner empty" message on my fax machine?

My all-in-one printer keeps telling me that I need to change the drum soon. I bought a new drum inserted it into the printer and now I can't print anything. Plus, it is still telling me that I need to...

Brother MFC 6800 Drum replaced, now prints blank page. Plastic sheet was spit out indicating correct install. Same toner cartridge will work if old drum re-inserted, but print quality is bad, as drum worn...

1.5 inch black line on incoming faxes

Black stains on ep2010 cs pro i tried to clean the drum now it do

Toner for fax machine 2920

Displayed error

Hello, I have a Minolta Magicolor 2490 MF, printer/copier. The display shows "low toner". My question is this: Is it possible for the machine to identify the seperate toner levels, so I can replace only...

CC and drum Icon will not go out after changing toner cartridge

Poor quality of copies

Not finding what you are looking for?

DCP-7025 All-In-One Laser Printer

How do I bypass a "toner empty" message on my fax machine?

Related Topics

Ask a Question

Popular Questions

Brother DCP vs MFC

Need to download the Brother MFL-Pro Control Center as my CD brok

How to reset DCP 7030 drum unit

Unable to clean error on Brother DCP115C

Dcp 7020 and 7040 toner life end message premature, need override

Check Out the Latest Printers Report

Top Brother Office Equipment & Supplies Experts

Norman Weimar

Cindy Wells

k24674

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Manuals & User Guides