Question about Office Equipment & Supplies

Error code f35-3 on konica minolta 7145 copier

Cant start our machine because of this error code f35-3,its giving us a night mare.Will be so glad if you can assist

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.
Contributor
1 Answer

How to reset failure codes (F34, F35, F36). To reset failure codes, perform the following: 1. Enter the 25 mode (turn the machine ON, while pressing the 2 and 5 keys). 2. Select [1. software SW settings]. 3. Using the arrows on the left of the touchscreen scroll to DIP SW 3. 4. Using the middle arrows scroll to BIT 1. 5. On the touchscreen select OFF (0). 6. Power the copier OFF/ON.

Posted on Sep 22, 2008

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.
Contributor
8 Answers

Raise the automatic document feeder as far as it will lift.Clean and clear anything that may be on the glass and close the feeder.This code means somthing was left on glass.

Posted on Mar 04, 2008

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Konica 7145 say PM fixing unit (Web) won't copy but will print

have tech come out and replace the web roller above the fuser unit, and clear the counter after install. THAT IS LEGACY MACHINE google for the web roller

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Jan 10, 2017 | Konica Minolta Konica 7145 Minolta Bizhub...

1 Answer

How to remove minolta 7135 code E 56-1

replace the image control board, all check all connection to printed circuit board remove each connector seperately and check for a bent pin

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Oct 11, 2016 | Konica Minolta Office Equipment & Supplies

1 Answer

Where is the hard drive on konica minolta 7145 biz hub

In the rear of the machine

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Aug 11, 2014 | Konica Minolta Konica 7145 Minolta Bizhub...

1 Answer

Konica 7145

fuser code hot part replace it

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Apr 13, 2014 | Konica Minolta Konica 7145 Minolta Bizhub...

1 Answer

Konica 7145 error code F34-2

do this once code comes back replace the fuser continue reset couls cause fire ruining a perfectly good day

To reset failure codes, perform the following:
1. Enter the 25 mode (turn the machine ON, while pressing the 2 and 5 keys).
2. Select [1. software SW settings].
3. Using the arrows on the left of the touchscreen scroll to DIP SW 3.
4. Using the middle arrows scroll to BIT 1.
5. On the touchscreen select OFF (0).
6. Power the copier OFF/ON.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Dec 30, 2013 | Konica Minolta Office Equipment & Supplies

1 Answer

My konica minolta bizhub 7145 b/w copier is showing error code F-51-5 The copier will power up and then seize. The copier is about 5 years old with a total count of 320,000 copies

Hi the problem is going to be with the M1 motor most of the time replacing this motor will fix the issue However in rare cases if it still gives you the same error after replacing m1 motor then you will need to change CB Main Body control board my advice is to replace the motor and if it still gives error code replace the cb board but it will fix your problem

Mar 09, 2011 | Konica Minolta Bizhub 222 Black and White...

1 Answer

What are codes F-34 and F-35?

These are heat sensor abnormality error codes in Konica Minolta 7222/7145/7135/7235/7228 models.You did not mention the model.

Oct 04, 2010 | Konica Minolta Bizhub C300 All-In-One...

3 Answers

I HAVE A KONICA 7145 COPIER ANND HAVE THE E-56-1 COPIAR

this code means the system control board and the main control board are not communicating with each other. the new main boards have modified to prevent this code. to reset the code turn the main switch on the left side of the machine off for about 10 seconds then back on

Oct 04, 2009 | Konica Minolta Office Equipment & Supplies

1 Answer