Relic Watch Band Removal

relic will help you, http://www.relic-watches.com/

Number is there on battery- use magnifier.

I'm having the same problem with this watch, I found this guide but it's for a similar watch and doesn't seem to help. I'm hoping this helps you more than it helped me

mcdevito75 Here, You can go to Ebay or simply look for a small watch repair shop in your area for a new Bracelet for your Reic watch.

Depends on the type of band. Is it a twist-o-flex or solid link? Your best bet is to seek out a local watch repair business and let them adjust it for you! Unless you do these often it can be frustrating and you could lose small parts!

Good luck!

No but if this is a mens watch there might be a micro adjustment on the clasp. To adjust press the pin in the clasp and move the pin in or out depending on the position of the pin to make loose or tight.

how to adjust a man's beverly hills polo club watch band

Hi i need to change the band in my watch any idea how to do it ?

Many Thanks
Wiola

For my relic ZR15372, all I did was take a thin, hard object (a thumbtack in my case) and carefully pushed out the connecting bar from the link.

If you look at the inside of the band of your watch, you may notice that on some of the links (the ones nearest the clasp for me) there is a little arrow pointing at the side - if you look at the side of the links, there should be a little hole, big enough to push a thumbtack into. If you apply enough pressure (again, carefully - no need to stab your thumb or any other part of your body), the connector pin should slide out a little on the other side. Then it's just a matter of pulling the pin out - perhaps a pair of tweezers would do the trick.

Hope this works for you!